Yamaha SB168-ES Firmware Update Manual | Page 8
■
Updating the EtherSound firmware
This section explains how to update the firmware for the EtherSound module built into the SB168-ES.
NOTE
・
For more information on the ES-Firmware Updater, an EtherSound firmware update program, visit the AuviTran SARL
website or refer to the “ES-Firmware Updater USER’S MANUAL” installed during the course of this update.
1. Double-click “AVS-FirmwareUpdater Setup
vx.xx.exe” (an update program installer you
downloaded from the AuviTran website),
then follow the instructions on screen to
install the program.
“
vx.xx” represents the version number of the
ES-Firmware Updater.
NOTE
・
When running under Windows Vista / 7, the "User
Account Control" dialog box may appear. Click
[Continue] or [Yes].
・
You may be prompted to restart the computer after
the installation is complete. Before proceeding to
step 2, restart the computer.
2. Connect the EtherSound [IN] jack on the
front panel of the SB168-ES unit to the
Ethernet jack on the computer using an
Ethernet cable.
3. Turn on the power to the SB168-ES.
4. Select [Start]→[All programs]→[AuviTran]→
[Firmware Update]→[ES-Firmware Updater].
A license agreement dialog box will appear.
NOTE
・
When running under Windows Vista / 7, the
"User Account Control" dialog box may appear.
Click [Continue] or [Yes].
5. Scroll to the end of the agreement, then
click [I Agree].
The ES-Firmware Updater will start up.
NOTE
・
If a dialog box enabling you to stop the
EtherSound service appears, click [Yes].
6. For [Network adapter] in the “Settings”
section, select the network adapter for the
Ethernet connector that is connected to the
SB168-ES.
7. Check the box to the left of the device
description listed in the “EtherSound
Devices” section.
NOTE
・
If no device is listed, click the [Refresh] button.If
still no device is listed, your computer may not be
properly connected to the SB168-ES.Please make
sure that the cable is not disconnected or
damaged, that you have selected the correct
network adapter, and that the SB168-ES has
started in Normal mode.
8. Select an appropriate firmware component
for [Firmware to program:] in the “Program”
section.
Select firmware version 0x0C16 or later.
8