Yamaha EMX512SC Owner's Manual | Page 7

Yamaha Musical Instruments Owner's Manual - EMX512SC.
Download
Page  of 36
4.9, 1182 votes
background image

 Quick Guide

BASIC

EMX512SC/EMX312SC/EMX212S

7

We  begin by connecting up two speakers and generating some
stereo output. Note that operations and procedures will vary
somewhat according to the input devices you are using.

 

1

Connect up the speakers and your input devices 
(microphones, instruments, etc.)

Use non-powered speakers and dedicated speaker cable. Connect one speaker 
to SPEAKERS jack A (A1 or A2), and the other to jack B (B1 or B2). Then con-
nect your input devices (microphones, guitar, etc.) to the appropriate input jacks 
on the top panel. For details, see page 30.

RIGHT

WRONG!!

Getting Sound to the Speakers

1

2,8

4

6

2,7,9

3

5

1

NOTE

We recommend that you do not 
connect electric instruments 
(such as electric guitars and 
basses) directly to the EMX. 
Instead, these instruments 
should be connected through 
an intermediary device such as 
a direct box, a preamp (guitar 
amp), or an amp simulator.

Before connecting input 
devices to the EMX, be sure 
that all of these devices (includ-
ing microphones) are powered 
off. And before turning the 
power to any device on or off, 
be sure to turn the volume of 
that device all the way down. 
Neglect of these precautions 
may result in large noise bursts 
that may damage your equip-
ment, your ears, or both.

Never connect both A and B 
jacks to a single speaker. Con-
nection of both jacks to the 
same speaker may result in 
damage to the mixer.

0.494137s