Yamaha AVANTGRAND N2 User's Manual | Page 41

Yamaha Keyboard & Mouse User's Manual - AVANTGRAND N2.
Download
Page  of 49
4.3, 1739 votes
background image

N3/N2 Owner’s Manual 

41

ENGLISH

N3: Assembling the Unit

• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance 

with the sequence given below.

• Assembly should be carried out by at least three persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument.
• Be sure to tighten all screws upon completing the assembly of each unit.
• To disassemble, reverse the assembly sequence given below.

1 Remove the parts and collect them 

together for assembly.
1-1 Remove the parts shown below from the 

smaller box.

1-2 Set the larger box upright with the right side up.
1-3 Cut the bands.
1-4 Remove the covers.

2 Attach and securely tighten the right front 

leg and the rear leg with the bolts.

3 Set a blanket at the left corner.

CAUTION

Have a Phillips-head (+) screwdriver of the 
appropriate size ready.

Do not lay the main unit 
upside down on the 
floor.

CAUTION

Incorrect

x 17

Bolts

Pedal

Wrench

AC power cord

Pedal brace rods

Cord holders

x 3

x 4

Screws

Front (L)

Rear

Front (R)

Legs

x 2

(Used to tighten bolts)

When the instrument is set upright (as in the illustration above), 
take extra care not to keep the instrument from falling over, since 
it is unstable in this position.

x 6

x 5

CAUTION

39

0.521136s