Yamaha AD8HR Data Sheet
ANALOG INPUT SPECIFICATIONS
DIGITAL INPUT AND OUTPUT SPECIFICATIONS
PAD
GAIN
Actual Load
Impedance
For use with
nominal
Input level
Connector
Nominal
Max.
before clip
INPUT 1−8
-62dB
3kΩ
50-600Ω Mics
& 600Ω Lines
-62dBu
-42dBu
XLR3-31 type*
+10dB
+10dBu
+30dBu
Output terminal
Format
Level
Connector
DIGITAL OUT A
INPUT1/2 (WC only)*
AES/EBU
RS422
D-sub 25 pin
OUTPUT1-8
DIGITAL OUT B
OUTPUT1-8
AES/EBU
RS422
D-sub 25 pin
WORD CLOCK
IN
-
TTL/75Ω
BNC
OUT
* Input1/2 (Primary) can be assigned to Word Clock source.
480
44
383.5
353.5
429.2
Rear Panel
AD8HR
AD8HR
AD Converter with Remote Preamplifier
Remotely control able 8-channel AD converter and preamplifier with
96 kHz processing.
• Microphone preamplifier technology inherited from the PM5000 analog live sound console for unsurpassed sound quality.
• Microphone preamplifier gain can be remotely controlled in steps of 1 dB from compatible Yamaha digital mixing consoles.
• High-pass filter with remotely controllable cutoff frequency on each channel.
• Remotely switchable phantom power supply.
• Up to 255 AD8HRs can be daisy-chained for massive input capacity.
• AES/EBU digital connection to digital mixing console minimizes the need for analog cabling.
• Eight XLR connectors and D-Sub AES/EBU terminals in a compact 1U design.
• Dual output connectors enable 2 x 8-channel digital audio output in the AES/EBU format.
• Remote control can be implemented via RS422 or switchable PC/RS422 nine-pin terminals.
SYSTEM EXAMPLE
GENERAL SPECIFICATIONS
Sampling frequency
Internal: 44.1kHz,48kHz,88.2kHz,96kHz
External: Normal rate: 44.1kHz (-10%) to 48kHz (+6%)
Double rate: 88.2kHz (-10%) to 96kHz (+6%)
Signal delay
0.9ms Typ. ANALOG INPUT to DIGITAL OUTPUT (@fs=48kHz)
0.45ms Typ. ANALOG INPUT to DIGITAL OUTPUT (@fs=96kHz)
Total harmonic distortion*1
Less than 0.05%, 1kHz @-1dBFs Output, Gain = -62dB
Less than 0.01%, 1kHz @-1dBFs Output, Gain = +10dB
Frequency response
(INPUT1 to 8 to DIGITAL OUT1 to 8)
20Hz - 20kHz, +1.0, -3.0dB, @-1dBFs , Gain = -62dB
20Hz - 20kHz, +1.0, -1.5dB, @-1dBFs , Gain = +10dB
Dynamic range
110dB typ. Gain = +10dB
Hum & noise level*2
(20Hz to 20kHz), Rs=150Ω
-80dBFs, Gain = -62dB
-110dBFs, Gain = +10dB
Crosstalk (@1kHz)
-100dB*, -80dB, Adjacent Input Channels
Phantom Power
+48V
Power requirements
Japan:
AC100V, 50/60Hz
North America: AC120V, 60Hz
Other Areas: AC230V, 50Hz
Power consumption
35W
Dimensions (W x H x D)
480mm x 44mm x 355mm (18.9" x 1.73" x 13.9"), 1U
Weight
5.0kg (11lbs)
DIMENSIONS
unit : mm
*1 Total harmonic distortion is measured with a 18dB/Oct filter @80kHz.
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with
infinite dB/Oct attenuation.
* Crosstalk is measured with a 30dB/octave filter @22kHz.