White Rodgers Type 1E56 User's Manual

White Rodgers Thermostats User's Manual - Type 1E56.
Download
Page  of 4
4.2, 2344 votes
background image

Printed in U.S.A.

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.

DESCRIPTION

Operator: Save these instructions for future use!

TYPE 1E56

Low Voltage Heating/Cooling Thermostat

INSTALLATION INSTRUCTIONS

WHITE-RODGERS

WHITE-RODGERS DIVISION
EMERSON ELECTRIC CO.
9797 REAVIS ROAD
ST. LOUIS, MISSOURI 63123-5398

CONTENTS

Description .........................................................  1
Precautions ........................................................  1
Installation ..........................................................  2

Select Thermostat Location
Route Wires to Location
Attach Subbase to Walls
Attach Thermostat to Subbase

Operation & Maintenance ..................................  5

Adjusting Heat Anticipator
Calibrating Thermostat

This low voltage thermostat is designed to provide conve-
nient control of the heating/cooling system. To provide
greater room comfort, the sensitive spiral bimetal is com-
bined with an adjustable heating anticipator and a fixed
cooling anticipator to provide maximum comfort.

PRECAUTIONS

PART NO. 37-2196B

Replaces 37-2196

9509

If in doubt about whether your wiring is millivolt, line, or low
voltage, have it inspected by a qualified heating and air
conditioning contractor, electrician, or someone familiar
with basic electricity and wiring.

Do not exceed the specification ratings.

All wiring must conform to local and national electrical
codes and ordinances.

This control is a precision instrument, and should be
handled carefully. Rough handling or distorting compo-
nents could cause the control to malfunction.

To prevent electrical shock and/or equipment
damage, disconnect electric power to system at
main fuse or circuit breaker box until installation
is complete.

Do not short out terminals on gas valve or pri-
mary control to test. Short or incorrect wiring will
burn out heat anticipator and could cause per-
sonal injury and/or property damage.

Do not use on circuits exceeding 30 volts. Higher
voltage will damage control and could cause
shock or fire hazard.

WARNING

!

CAUTION

!

0.482312s