White Rodgers 760-802 Flame Sensor Installation Instructions

White Rodgers Heaters Installation Instructions - 760-802 Flame Sensor.
Download
Page  of 2
4.7, 1119 votes
background image

To prevent electrical shock and/or equipment
damage, disconnect electric power to system at
main fuse or circuit breaker box until installation
is complete.

Label all wires prior to disconnection when ser-
vicing controls. Wiring errors can cause improper
and dangerous operation.

Following installation or replacement, follow
appliance manufacturers’ recommended instal-
lation/service instructions to insure proper
operation.

Printed in U.S.A.

PART NO. 37-5636A

9645

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.

DESCRIPTION

WHITE-RODGERS DIVISION
EMERSON ELECTRIC CO.
9797 REAVIS ROAD
ST. LOUIS, MO 63123-5398
(314) 577-1300  FAX (314) 577-1517

WHITE-RODGERS

760 Series

Electrodes

INSTALLATION INSTRUCTIONS

The 760 series electrodes are made in various configura-
tions to meet the specific requirements of different appli-
cations. Depending on electrode design, they may be
used for spark ignition, flame sensing or a combination of
both.

Operator: Save these instructions for future use!

PRECAUTIONS

THESE CONTROLS MUST BE INSTALLED BY A
QUALIFIED INSTALLER.

All wiring must conform to local and national electrical
codes and ordinances.

Do not use on circuits exceeding specified volt-
ages. Higher voltages will damage control and
could cause shock or fire hazard.

Shut off main gas to heating system until installa-
tion is complete.

CAUTION

!

These electrodes are not universal replacements. They
can only be used to replace the identical type in applica-
tions where it was originally installed by the equipment
manufacturer. If the electrode you are replacing is not the
same type number, contact the original equipment manu-
facturer (OEM) for a suggested replacement.

TYPICAL ELECTRODE ASSEMBLIES

WARNING

!

Related Manuals for White Rodgers 760-802 Flame Sensor

0.559944s