White Rodgers 1E65-144 User's Manual

White Rodgers Thermostats User's Manual - 1E65-144.
Download
Page  of 4
4.4, 2338 votes
background image

PART NO. 37-6862D

Replaces 37-6862C

0839

1E65-144

Non-programmable Electronic Digital Thermostat 

For Line Voltage Applications

INSTALLATION AND OPERATION INSTRUCTIONS

Operator: Save these instructions for future use!

DESCRIPTION

White-Rodgers is a division 

of Emerson Electric Co.

www.white-rodgers.com

The 1E65-144 thermostat has been designed to control electric heating 
systems such as baseboard heaters, radiant fl oors, radiant ceilings 
and convectors.

The adapter plate is used to offset the thermostat when an obstruction 
prevents the thermostat from being mounted directly to the junction 
box.

The thermostat cannot be used with the following:
-  a resistive load under 2 A
-  a resistive load over 16.7 A
-  systems driven by a contactor or a relay (inductive load)
-  central heating systems

Parts 

Supplied: 

  Available 

Accessories:

One (1) thermostat   

 

F61-2642 Adapter Plate

Two (2) 6-32 pan head screws

Supply:   

120/240 VAC, 50/60 Hz

Minimum load:  2 A (resistive only)
 

500 W @ 240 VAC

 

250 W @ 120 VAC

Maximum load:  16.7 A (resistive only)
 

4000 W @ 240 VAC

 

2000 W @ 120 VAC

Setpoint range: 

7°C to 32°C (45°F to 90°F)

Display range: 

0°C to 37°C (32°F to 99°F)

Display resolution:   0.1°C (1°F)
Shipping: 

–20°C to 50°C (-4°F to 120°F)

Approval: 

INSTALLATION

Installation should be done by a qualifi ed heating and air conditioning 
contractor or licensed electrician.

Loosen the screw holding the thermostat cover to the base, open cover 
on hinge and remove the cover.

Temperature 

Display

Temperature 
Adjustment 
Buttons

Light 
Button

System 
Switch

PRECAUTIONS

* Failure to read and follow all instructions carefully before 
installing or operating this control could cause personal injury 
and/or property damage. 
* All wiring must conform to local and national electrical 
codes and ordinances.

WARNING

!

*   To prevent electrical shock, personal injury, and/or equipment 
damage, disconnect electric power to system at main fuse or 
circuit breaker box prior to installation or service.

Screw

SPECIFICATIONS

Optional: Use the adapter plate accessory if you need to offset the 
mounting holes on the junction box. Align and affi x the wall plate to 
the electrical junction box using two 6-32 fl at head screws included 
with the plate. 

0.526463s