Whirlpool Whirlpool Washer 200 User's Manual

Whirlpool Washers User's Manual - Whirlpool Washer 200.
Download
Page  of 5
4.9, 2256 votes
background image

Sears Kenmore/Whirlpool Front Load Washer 

Error Codes: 02F    dLF

 

  
Model: 110.44832 200   (110.  =  Whirlpool)

 

S/N: CSP 1903874

 

Type: 199-AKP 705/WT

 

 

SOURCE: www.applicancepartspros.com 

    WHIRLPOOL FAULT CODES 

Whirlpool Duet Front Loading Automatic Washer Fault Codes 

Failure 
Code
 

Fault Code Description 

Solution 

FH 

No water detected entering 
machine or Pressure switch trip 
not detected. 

If after 30 seconds the control does not detect water 
entering machine and then valves will be turned off and 
the error code will be displayed. 
Or 
If the control has turned the water valves on and after 8 
minutes the flow meter has detected 10.5 gallons of 
water passing through it, but has not detected the 
pressure switch trip, the valves will be turned off and the 
error code will flash. 
 
Press PAUSE/CANCEL twice to clear the display. 
 
Potential Causes 
 
• If there is no water in the unit: 
  - Make sure that both valves at the water source(s) are 
turned on all the way. 
  - Check for plugged or kinked inlet hoses or plugged 
screens in the inlet valves 
  - Verify inlet valve operation 
• If there is water in the unit: 
  - Verify Drain pump operation 
  - Pressure Switch Hose is in good condition and 
properly connected to Tub and Pressure switch 
 
• Verify there is not a siphon problem 
• Verify wire harness connections to; Inlet Valves, 
Pressure Switch, Drain Pump, Flow Meter, and Central 
Control Unit (CCU) 
• Check all hoses for possible leaks 
• Verify pressure switch operation 
• Verify flow meter operation 
• Verify CCU operation 
 
Replace failed component. 

F02 

Long Drain 

If the drain time exceeds 8 minutes, the water valves are 
turned off and F02 is flashed. 
 
Press PAUSE/CANCEL twice to clear the display. 
 
NOTE: After 4 minutes the “Sud” error will be displayed, 

0.533547s