Whirlpool WFW8300SW1 Use & Care Manual | Page 7

Whirlpool Washers Use & Care Manual - WFW8300SW1.
Download
Page  of 52
4.8, 2061 votes
background image

7

Electrical Requirements

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical 
supply is required. A time-delay fuse or circuit breaker is 
recommended. It is recommended that a separate circuit 
serving only this appliance be provided. 

This washer is equipped with a power supply cord having a 
3 prong grounding plug.

To minimize possible shock hazard, the cord must be 
plugged into a mating, 3 prong, grounding-type outlet, 
grounded in accordance with local codes and ordinances. If a 
mating outlet is not available, it is the personal responsibility 
and obligation of the customer to have the properly grounded 
outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is 
recommended that a qualified electrician determine that the 
ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure the 
washer is properly grounded. 

Do not have a fuse in the neutral or ground circuit.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,
fire, or electrical shock.

WARNING

GROUNDING INSTRUCTIONS

For a grounded, cord-connected washer:
This washer must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electrical
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.

WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance – if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.

For a permanently connected washer:
This washer must be connected to a grounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the appliance.

 

0.538288s