Whirlpool WDF770SAFZ Installation Instructions | Page 3

Fingerprint-Resistant Stainless Steel Dishwasher with Sensor Cycle
Page  of 76
4.9, 1219 votes
background image



You Need to:


Slowly open dishwasher door while someone grasps the rear 

of the dishwasher. Remove shipping materials and drain hose. 

Close dishwasher door until latched.
NOTE: Each dishwasher is tested at the factory and may 

contain some residual water in the tub as a result of the test.


Observe all governing codes and ordinances.


Install this dishwasher as specified in these instructions.


Installation should be performed by a qualified 

service technician.


The dishwasher must be installed to meet all electrical 

and plumbing national and local codes and ordinances.
Care shall be exercised when the appliance is installed 

or removed, to reduce the likelihood of damage to the 

power cord.

WARNING: To reduce the risk of electric shock, fire, or injury 

to persons, the installer must ensure that the dishwasher is 

completely enclosed at the time of installation.

You can be killed or seriously injured if you don't immediately 


 can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.





Tip Over Hazard

Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.