Whirlpool WDF560SAFT Installation Instructions | Page 5

Stainless Steel Dishwasher with 1-Hour Wash Cycle
Download
Page  of 76
4.6, 1711 votes
background image

5

Other Parts Needed (not provided):

3

/8" Compression x 3/4" Hose 

Fitting with rubber seal and 

90° elbow (required to properly 

connect household water line 

to the dishwasher) (Whirlpool 

Part Number W10685193)

Household Wiring (Metallic) 

Strain Relief to fit 7/8" (22 mm) 

hole (required to properly 

secure household wiring to 

the dishwasher terminal box) 

(Whirlpool Part  

Number 4396672)

NOTE: Use only UL Listed/

CSA Approved part.
Twist-On Wire Connectors
NOTES:
 

 

Confirm proper size for 

connecting your gauge of 

household wiring to the 

16-gauge wiring in the 

dishwasher.

 

Use only UL Listed/CSA 

Approved parts.

Call us at our toll-free number, visit our website listed in the User 

Guide for part numbers above, or see local electrical/plumbing 

supply retailer for equivalent.

Optional Accessory Parts Available:

Moisture Barrier Tape
NOTE:
 Moisture barrier tape 

is an optional, added level 

of protection if installing a 

dishwasher under a wooden 

countertop. (Whirlpool Part  

Number 4396277)

Side Panel Kit

For enclosing the side of the 

dishwasher when installing it 

at the end of your cabinetry 

(Whirlpool Part Number varies 

with color.)

Call us at our toll-free number or visit our website listed in the 

User Guide for part numbers above. 

First-Time Installations

Check local codes. Check existing electrical supply. See the 

“Electrical Requirements” section. It is recommended that 

electrical connections be made by a licensed electrical installer.

Additional Tools Needed:

Small tubing cutter

Wire stripper

Cordless drill with 1/2", 3/4", and 11/2" hole saw bits

Additional Parts Needed (not provided):

Copper Tubing (3/8" O.D. 

suggested) or Flexible 

Braided Water Supply Line 

Kit (Whirlpool Part Number 

W10278635RP). Kit includes 

braided hose and 3/8" 

compression x 3/4" hose fitting.

Screw-Type Clamps 11/2"-2" 

(38-50 mm) (3 maximum)

Optional-Longer Drain Hose 

Maximum length 12 ft (3.7 m) 

(Whirlpool Part Number 3385556)
NOTE: Must meet AHAM/IAPMO 

test standards, fit 1" (25 mm) 

drain connection, and be 

resistant to heat and detergent

Call us at our toll-free number, visit our website listed in the  

User Guide for part numbers above, or see local plumbing 

supply retailer for equivalent.

NOTE: If using a flexible braided hose, replace inlet hose 

after 5 years to reduce the risk of hose failure. Record 

hose installation or replacement dates on the hose for 

future reference.

0.565497s