Whirlpool WDF518SAFB Owner's Manual | Page 3

Compact Tall Tub Dishwasher
Download
Page  of 14
4.3, 2361 votes
background image

3

Avoid overlapping items like bowls or plates that may trap food. 

Place plastics, small plates and glasses in the upper rack. 
Wash only plastic items marked “dishwasher safe.” 

To avoid thumping/clattering noises during operation, load 
dishes so they do not touch one another. Make sure lightweight 
load items are secured in the racks. 

Add Detergent

NOTE: If you do not plan to run a wash cycle soon, run a rinse 
cycle. Do not use detergent.

Use automatic dishwashing detergent only. Add powder, liquid 
or tablet detergent just before starting a cycle.

Fresh 
automatic 
dishwasher 
detergent 
results in better 
cleaning. Store 
tightly closed 
detergent 
container in a 
cool, dry place.

The amount of detergent to use depends on: 

How much soil remains on the items - Heavily soiled loads 
require more detergent.

The hardness of the water - If you use too little in hard water, 
dishes won't be clean. If you use too much in soft water, 
glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon) 
[typical water softener water and some city water] 
Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]

Depending on your water hardness, fill the Main Wash section 
of the dispenser as shown. Fill the Pre-Wash section to the 
level shown, if needed. 

NOTE: Fill amounts shown are for 
standard powdered detergent. 
Follow instructions on the 
package when using other 
dishwasher detergent. 

Add Rinse Aid

Your dishwasher is designed to use rinse aid for good drying 
performance. Without rinse aid your dishes and dishwasher 
interior will have excessive moisture. The heat dry option will 
not perform as well without rinse aid.

Rinse aid keeps water from forming droplets that can dry as 
spots or streaks. They also improve drying by allowing water to 
drain off of the dishes during the final rinse.

Rinse aid helps to reduce excess moisture on the dish racks 
and interior of your dishwasher.

Check the rinse aid indicator. Add rinse aid when the indicator 
window looks clear.

To add rinse aid, turn the 
dispenser cap counterclockwise 
and lift off. Pour rinse aid into the 
opening until the indicator 
window looks full. Replace the 
dispenser cap and turn 
clockwise. Make sure 
cap is fully locked. 

NOTE: For most water conditions, 
the factory setting of 2 will give 
good results. If you have hard water 
or notice rings or spots, try a higher 
setting. Turn the arrow adjuster 
inside the dispenser by either using 
your fingers or inserting a flat-blade 
screwdriver into the center of the 
arrow and turning. 

Select a Cycle

NOTE: Heavier cycles and options affect cycle length.

Pots and Pans – 
Use for heavily soiled, 
hard-to-clean items.

Heavy Wash – Use 
for heavy food soil.

Normal – Use for 
normal food soil. The 
energy usage label is 
based on this cycle.

Quick Wash – Use for prerinsed or lightly soiled loads.
Rinse Only – (no options apply to this cycle) Do not use detergent. 
A rinse keeps food from drying on your dishes and reduces odor 
buildup in your dishwasher until you are ready to wash a full load.

Select Options

A heated dry option should be used for best drying of 
dishes. When the heated dry option is selected, the 
light is on.

 

A no heat dry option can be used to save energy.

When loading silverware, always place sharp 
items pointing down and avoid “nesting” as 
shown. 

STEP 2

A. Cover latch
B. Pre-Wash section

C. Main Wash section

B

A

C

Soft Water

Hard Water

Soft Water

Hard Water

Main Wash

Pre-Wash

STEP 3

A. Indicator

A

A. Adjustable setting

A

0.578415s