Whirlpool WDF331PAHW Owner's Manual | Page 9

Heavy-Duty Dishwasher with 1-Hour Wash Cycle
Download
Page  of 48
4.3, 1204 votes
background image

9

OPTION SELECTIONS

OPTIONS

CAN BE 

SELECTED 

WITH

WHAT IT DOES ADDED TIME 

TO CYCLE

ADDED 

WATER 

GALLONS 

(LITERS)

Runs dishwasher at a later time. Select a wash 

cycle and options. Each time you press the  

Delay button, it will display the next available delay 

time. Press 4 HR DELAY. Press START/RESUME.  

Close door firmly.
NOTES:

 

The dishwasher remembers the last Delay you 

selected. To reset the Delay time to something 

other than what is displayed, continue to press 

the Delay button until the desired delay time  

is reached.

 

Anytime the door is opened (such as, to add  

a dish), Start/Resume must be pressed again  

to resume delay countdown.

Available with 

any cycle

Delay 4 hours

0:00

0

To turn on lock, press and hold 4 HR DELAY for 3 seconds. Control Lock light will stay on for a short time, indicating 

that it is activated and all buttons are disabled. If you press any button while your dishwasher is locked, a light 

flashes three times. Dishwasher door can still be opened/closed while the controls are locked.
To turn off Lock, press and hold 4 HR DELAY for 3 seconds. Light turns off.

CONTROLS AND CYCLE STATUS

CONTROL

PURPOSE

COMMENTS

Press to start or resume a wash cycle.
If the door is opened during a cycle or the power is interrupted, the Start/Resume button LED flashes. 

Cycle will not resume until door is closed and Start/Resume is pressed.
Press to cancel wash cycle.
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain 

completely. Press CANCEL again to fully cancel machine.

The Clean indicator glows when a cycle is finished.

0.628438s