Whirlpool Side by Side Refrigerator KTRS22EMBL00 User's Manual | Page 5

Whirlpool Refrigerators User's Manual - Side by Side Refrigerator KTRS22EMBL00.
Download
Page  of 56
4.3, 1154 votes
background image

5

Electrical Requirements

Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection:

Recommended grounding method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord.

NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the control (Thermostat, Refrigerator
or Freezer Control depending on the model) to OFF and then
disconnect the refrigerator from the electrical source. When you
are finished, reconnect the refrigerator to the electrical source
and reset the control (Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired setting.

Base Grille

To remove the base grille:
1. 
Open both doors.

2. Place hands along the ends of the grille, with your thumbs

along the top. Push in with your thumbs and pull up on the
bottom.

NOTE: Be sure to refasten the Tech Sheet behind the base grille
after cleaning.

To replace the base grille:
1. 
Open both doors.

2. Line up the grille support tabs with the metal clips.

3. Push the grille firmly to snap it into place.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in
death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

Related Manuals for Whirlpool Side by Side Refrigerator KTRS22EMBL00

0.519116s