Whirlpool Refrigerator ET9FHTXMQ01 User's Manual | Page 9

Whirlpool Refrigerators User's Manual - Refrigerator ET9FHTXMQ01.
Download
Page  of 48
4.7, 1139 votes
background image

9

Adjust the Doors

Door Closing

Your refrigerator has two front adjustable rollers – one on the right 
and one on the left. If your refrigerator seems unsteady or you 
want the doors to close easier, adjust the refrigerator's tilt using 
the instructions below. 
1. Remove the base grille. See the Base Grille graphic in 

“Refrigerator Doors.” The two leveling screws are part of the 
front roller assemblies which are at the base of the refrigerator 
on either side.

2. Use a screwdriver to adjust the leveling screws. Turn the 

leveling screw to the right to raise that side of the refrigerator 
or turn the leveling screw to the left to lower that side. It may 
take several turns of the leveling screws to adjust the tilt of the 
refrigerator. 
NOTE: Having someone push against the top of the 
refrigerator takes some weight off the leveling screws and 
rollers. This makes it easier to adjust the screws.

3. Open both doors again and check to make sure that they 

close as easily as you like. If not, tilt the refrigerator slightly 
more to the rear by turning both leveling screws to the right. It 
may take several more turns, and you should turn both 
leveling screws the same amount.

4. Replace the base grille.

Align Doors

If the space between your doors looks uneven, you can adjust it 
using the instructions below:
1. Pry off the top hinge cover.
2. Loosen the top hinge screws using a 

⁵⁄₁₆" socket or wrench.

3. Have someone hold the door in place or put a spacer between 

the doors while you tighten the top hinge screws.

4. Replace the top hinge cover.

REFRIGERATOR USE

Using the Controls

For your convenience, your refrigerator controls are preset at the 
factory. When you first install your refrigerator, make sure that the 
controls are still preset to the mid-settings as shown. 
NOTE: To turn your refrigerator off, turn the refrigerator control to 
the word OFF or until the word OFF appears. Your product will not 
cool when the refrigerator control is set to OFF.

Mid-setting “3”

Mid-setting “3”

Mid-setting “4”

IMPORTANT:

Give your refrigerator time to cool down completely before 
adding food. It is best to wait 24 hours before you put food 
into the refrigerator.

If you add food before the refrigerator has cooled completely, 
your food may spoil. Adjusting the Refrigerator and Freezer 
Controls to a higher (colder) than recommended setting will 
not cool the compartments any faster.

Adjusting Controls

The mid-settings indicated in the previous section should be 
correct for normal household usage. The controls are set correctly 
when milk or juice is as cold as you like and when ice cream is 
firm. 
If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not blocked.
If you need to adjust temperatures, use the settings listed in the 
chart below as a guide. On models with two controls, adjust the 
refrigerator temperature first. Wait at least 24 hours between 
adjustments and then recheck the temperatures. 

CONDITION/REASON:

ADJUSTMENT:

REFRIGERATOR too warm

REFRIGERATOR or 
TEMPERATURE Control one 
setting higher 

FREEZER too warm/too 
little ice 

FREEZER or TEMPERATURE 
Control one setting higher

MAX ice production switch

REFRIGERATOR too cold

REFRIGERATOR or 
TEMPERATURE Control one 
setting lower

FREEZER too cold

FREEZER or TEMPERATURE 
Control one setting lower 

4

REFRIGERATOR

4

FREEZER

Related Manuals for Whirlpool Refrigerator ET9FHTXMQ01

0.550775s