Whirlpool M8TXEGFBB Dimension Guide

Whirlpool Refrigerators Dimension Guide - M8TXEGFBB.
Download
Page  of 1
4.2, 2479 votes
background image

PRODUCT MODEL NUMBER

PRODUCT DIMENSIONS

M8TXEGFB

Electrical: A 115-volt, 60-Hz, AC-only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned
off by a switch. Do not use an extension cord.

NOTE: Before performing any type of
installation, cleaning, or removing a light bulb,
turn the control (Thermostat, Refrigerator or
Freezer Control depending on the model) to OFF
and then disconnect the refrigerator from the
electrical source. When you are finished,
reconnect the refrigerator to the electrical
source and reset the control (Thermostat,
Refrigerator or Freezer Control depending on
the model) to the desired setting. See “Using
the Controls.”

Water: A cold water supply with water
pressure between 30 and 120 psi (207 and 827
kPa) is required to operate ice maker and water
dispenser. If you have questions about your
water pressure, call a licensed, qualified
plumber.

IMPORTANT: The pressure of the water coming
out of a reverse osmosis system going to the
water inlet valve of the refrigerator needs to be
between 30 and 120 psi (207 and 827 kPa).

Reverse Osmosis Water Supply: If a reverse
osmosis water filtration system is connected to
your cold water supply, the water pressure to
the reverse osmosis system needs to be a
minimum of 40 to 60 psi (276 to 414 kPa).

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.

Ref. W10551695A

1/31/14

1 / 2 " (1.25 cm) 

2" (5.08 cm) 

1/2"

(1.25 cm)

IMPORTANT: This refrigerator is designed for indoor household use only.

To ensure proper ventilation for your refrigerator, allow for 

¹⁄₂" (1.25 cm) of space on

each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If
your refrigerator has an ice maker, allow extra space at the back for the water line
connections. When installing your refrigerator next to a fixed wall, leave a 2" (5.08 cm)
minimum space on the hinge side (some models require more) to allow the door to
swing open.

NOTE: This refrigerator is intended for use in a location where the temperature ranges
from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room
temperature range for optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is
recommended that you do not install the refrigerator near a heat source, such as an
oven or radiator.

Top Mount Refrigerator

LOCATION REQUIREMENTS

Model Size

Height -

Overall

“A”

Height -

Top of

Cabinet

“B”

Depth -

Door Open

90°

“C”

Depth -

With

Handles

“D”

Depth -

Without

Handles

“E”

Depth -

Cabinet

Only

“F”

Width -

Cabinet

“G”

18.5 cu.ft.

661⁄4"

(168.3 cm)

651⁄2"

(166.4 cm)

59

¹⁄₄"

(150.5 cm)

323⁄4"

(83.2 cm)

305⁄8"

(77.8 cm)

281⁄2"

(72.4 cm)

29

¹⁄₂"

(74.9 cm)

4

1

A

overall

B

top of

cabinet

G

not incl.

handle

E

incl.

handle

D

90˚

C

cabinet

F

Related Manuals for Whirlpool M8TXEGFBB

0.638528s