Weider CLUB C725 Owner's Manual | Page 9

Weider Home Gyms Owner's Manual - CLUB C725.
Download
Page  of 44
4.3, 1927 votes
background image

9

6.

Attach the Weight Tube (5) to the Leg Lever (4)
with an M8 x 60mm Button Bolt (95), two M8
Washers (84), a 12.5mm Spacer (138), and an M8
Nylon Locknut (139). 

Make sure that the Spacer

is inside the Leg Lever.

Next, press a 25mm Round Outer Cap (45) onto
the indicated end of the Weight Tube (5). Then,
slide the Olympic Adapter (46) onto the Weight
Tube. Attach the Olympic Adapter with an M8 x
10mm Set Screw (49).

6

7

7.

Apply grease to the barrel of an M10 x 70mm Bolt
Set (118). Attach the Leg Lever (4) to the Front
Leg (3) with the Bolt Set. 

Make sure that the

barrel of the Bolt Set is inserted through both
sides of the bracket on the Front Leg.

118

118

4

3

4

5

46

49

45

95

84

84

138

139

5.

Apply grease to an M10 x 175mm Bolt (42).
Attach the Backrest Frames (8) to the Bench
Frame (1) with the Bolt, two M10 Washers (83), a
33mm Spacer (52), and an M10 Nylon Locknut
(116). Set the end of the Backrest Post (7) in one
of the slots in the Bench Frame. 

Do not over-

tighten the Nylon Locknut; the Backrest
Frames must pivot  easily.

See step 4. Tighten the M10 Nylon Locknut
(116) and the four M6 x 40mm Screws (140). Do
not overtighten the Nylon Locknut; the
Backrest Post (7) must pivot easily.

5

42

116

83

83

52

1

7

8

Grease

Grease

0.466160s