Weider ULTIMATE BODYWORKS Owner's Manual | Page 7

7

2

2.  Pull the Short Knob (44) outward, extend the Top 

Frame (1) as far as possible, and then release 
the Knob. Make sure that the Knob is engaged 
in the hole in the Bottom Frame (2).

Then, pull the Long Knob (55) outward, move the 
Adjustment Leg (5) outward as far as possible, 
and release the Knob into one of the adjustment 
holes in the Adjustment Leg. Make sure that the 
Knob is engaged in an adjustment hole in the 
Adjustment Leg.

44

55

1

2

5

3.  Attach the Stabilizer (6) to the Adjustment Leg 

(5) with three M8 x 52mm Bolts (40), three M8 
Washers (54), and three M8 Locknuts (46). 
Make sure that the Bolts are in the hexagonal 
holes.

3

Hexagonal 

Holes

6

5

40

40

46

46

54

54