VTech VTech Baby Monitor DM111-2 User's Manual

VTech Baby Monitor User's Manual - VTech Baby Monitor DM111-2.
Download
Page  of 2
4.4, 1707 votes
background image

User’s manual
DM111/DM111-2

Safe & Sound

TM  

audio monitor

 

 

 

 

 

 

 

 

Congratulations

on purchasing your new VTech product. Before 
using this product, please read 

Important 

safety instructions in this manual. 

For support, shopping, and everything new  
at VTech, visit our website at  
www.vtechphones.com. In Canada, please 
visit 

www.vtechcanada.com

Register online to get an additional  
3-month warranty!

Visit www.vtechphones.com.

Registration
Register your product online for 

enhanced warranty support.

Product news
Learn about the latest VTech  
products.

Positioning the baby monitor
Place the parent unit within the operating range 

of the baby unit. We recommend the parent 

unit is at least 1 meter (3 feet) away from the 

baby unit to avoid audio feedback. If you still 

experience audio feedback, move the parent 

unit and the baby unit farther apart. 

 

Operating range
The operating range of the baby monitor is 

up to 300 meters (1000 feet) outdoors or 

50 meters (160 feet) indoors. The actual 

operating range may vary depending on 

the environmental conditions, and other 

interferences such as walls, doors, and other 

obstructions. 

 

Baby unit overview

Parent unit overview

 

Connect

Connect the parent unit

Before use

You may test the baby monitor before initial 

use, and at regular times thereafter. 
To test your baby monitor:

Place the parent unit and the baby unit in the 

same room to test the product.
Press and hold   on the baby unit until the 

POWER light turns off.
Press and hold   on the baby unit again 

until the 

POWER light turns on.

Press and hold   on the parent unit the 

POWER/LINK light turns off.
Press and hold   on the parent unit again 

until the 

POWER/LINK light turns on.

1.

2.

3.

4.

5.

If the parent unit is not linked to the baby unit, 

the 

POWER/LINK light on the parent unit will 

flash. Move the parent unit closer to the baby 

unit (but not less than 1 meter / 3 feet).

1    POWER light 
2      (On/off)
 

  Press and hold to turn on or off the    
 

 baby unit. 

3    Microphone 
4  
  Power jack

Overview

   POWER / LINK

POWER/LINK light

Lights off when the parent unit 

is off.
Lights on in green when the 

parent unit is on and linked to 

the baby unit.
Flashes in green when there is 

no link between the baby unit 

and parent unit, or when the 

parent unit is out of range from 

the baby unit.

         

 

 

         

  

   

   

 
 

         

   

 

Visual sound indicator
The visual sound indicator shows 

the sound level detected from 

the baby unit. It also shows the 

volume level during speaker 

volume setting.

 

Sound level detected from the 

baby unit is indepedent from the 

volume level set at the parent unit.

Green lights indicate a 

moderate sound level detected 

from the baby unit; or
Level 1 to Level 3 of the 

speaker volume setting. 
Red lights indicate a higher 

sound level detected from the 

baby unit; or
Level 4 to Level 5 of the 

speaker volume setting.

  LOW BATTERY

     

 

LOW BATTERY light

Flashes in red when the 

battery is low.

  POWER

POWER light

Lights off when the baby unit 

is off. 
Lights on in green when the 

baby unit is on.

1     Visual sound indicator 
2  
   POWER/LINK light 
3  
   LOW BATTERY light

4       (Volume down)
 

   Press to decrease the speaker volume.

5       (On/off)
 

   Press and hold to turn on or off the  

  

 parent unit. 

6     Speaker
 

   Listen to sounds transmitted from the  

  

 baby unit.

7       (Volume up)
 

  

 Press to increase the speaker volume.

8     Belt clip

9     Battery compartment cover

10   Power jack

Baby unit light

Parent unit light

Using your baby monitor

Power on or off the baby unit
To turn on the baby unit:

Press and hold   until the 

POWER light 

turns on.

To turn off the baby unit:

Press and hold   until the 

POWER light 

turns off.

Power on or off the parent unit
To turn on the parent unit:

Press and hold

   until the POWER/LINK 

light turns on.

To turn off the parent unit:

Press and hold   unit the 

POWER/LINK 

light turns off.

 1
 2

 3

Connect the baby unit

Use only the parent unit power adapter 

and the baby unit power adapter supplied 

with this product. 
The parent unit power adapter and baby 

unit power adapter are intended for a 

vertical or floor mount position. The prongs 

are not designed to hold the plug in place 

if it is plugged into a ceiling,  

under-the-table, or cabinet outlet.
Make sure the parent unit, the baby unit 

and the power adapter cord are out of 

reach of children
Both the baby unit and the parent unit are 

on once connected to the power supply.

6VDC / 300mA

baby’s saf

ety world

Parent Un

it

Power outlet not 

controlled by a 

wall switch

Power adapter

POW

ER

At least 1 meter (3 feet)

Parts checklist

Baby unit (DM111 BU/DM111-2 BU)
Parent unit (DM111 PU/DM111-2 PU)  
(1 for DM111 and 2 for DM111-2)
Power adapter for baby unit
Power adapter for parent unit  
(1 for DM111 and 2 for DM111-2)
User’s manual



POWER

POWER

POWER

POWER

POWER

POWE

R

 4

 1
 2
 3
 4

 5

 6

 7
 8

 9

6VDC / 300mA

baby’s saf

ety world

Parent Un

it

10

Power outlet not 

controlled by a 

wall switch

Power adapter

POWER / LINK

Below are the questions most frequently asked about 

Below are the questions most frequently asked about 

the baby monitor. If you cannot find the answer to 

your question, contact customer service by visiting our 

website at 

www.vtechphones.com or  

cal ing 

1 (800) 595-9511. In Canada, go to  

www.vtechcanada.com or cal  1 (800) 267-7377.

Why does the baby 

monitor not respond 

normally?

Try the fol owing (in the order 

listed) for common cure:

1. Disconnect the power 

from the baby unit and 

the parent unit.

2. Remove the batteries 

from the parent unit.

3. Connect the baby unit to 

the power supply again. 

The baby unit turns on.

4. Connect the parent unit 

to the power supply 

again; or insert two new 

AAA alkaline batteries. 

The parent unit turns on.

5. Wait for the parent unit 

to synchronize with the 

baby units. Allow up to 

one minute for this to  

take place.

Why doesn’t the 

POWER light on the 

baby unit turn on 

when I switch on the 

units?

Perhaps the baby unit is not 

connected to the power  

supply. 
Connect the baby unit to 

power supply. The baby unit 

turns on.

Why doesn’t the 

POWER/LINK 

light on the parent 

unit turn on when I 

switch on the units?

Perhaps the battery of the 

parent unit is empty and the 

parent unit is not connected 

to power supply. 
Connect the parent unit to 

power supply; or insert two 

new AAA alkaline batteries 

into the parent unit. The 

parent unit turns on and  

establishes connection with 

the baby unit.

Why does the baby 

monitor produce a  

high-pitched noise?

The units may be too close 

to each other. Make sure 

the parent unit and the baby 

unit at least 1 meter (3 feet) 

away from each other.

Why does the 

parent unit react 

too quickly to other 

sounds?

The baby unit also picks up 

other sounds than those 

of your baby. Adjust the 

speaker volume on the  

parent unit.

Why don’t I hear a 

sound/Why can’t I 

hear my baby cry?

You may have muted the 

volume or set it to a lower 

level. You may need to  

adjust the volume to a 

higher level.

Why does the  

parent unit beep?

The baby units may be out 

of range. Move the parent 

unit closer to the baby units 

(but not less than 1 meter / 

3 feet).

Why does the  

parent unit 

LOW 

BATTERY light 

flash?

When the parent unit is 

powered by batteries, there 

is not sufficient power for 

the parent unit to perform  

normally. Replace with two 

new AAA alkaline batteries.

Why can’t I establish 

a connection? Why 

is the connection 

lost every now and 

then? Why are there 

sound interruptions?

The baby units may be out 

of range. Move the parent 

unit closer to the baby units 

(but not less than 1 meter / 

3 feet). 
Other electronic products 

may cause interference with 

your baby monitor. Try  

instal ing your baby monitor 

as far away from these  

electronic devices as  

possible.

Frequently asked questions

Speaker volume of the parent unit
The speaker volume is preset to 

Level 3 on the 

parent unit. You can adjust to your preferred 

sound level.
To adjust the speaker volume:

Press   to decrease the volume, and   to 

increase the volume.

If you continue to press   or 

 even the 

volume reaches the minimum or maximum 

setting, the parent unit wil  sound once.
When the parent unit is in mute, the visual 

sound indicator wil  stil  indicate the sound 

detected from the baby unit.

Portable use of the  
parent unit (optional)

Use only AAA 

alkaline batteries (not 

included).
Do not mix old and new batteries. Do not 

mix alkaline, standard (carbon-zinc) or 

rechargeable (ni-cad, ni-mh, etc) batteries.
When the batteries are installed, the 

parent unit turns on.
The parent unit does not support 

recharging.

Install the batteries on the parent unit

Slide open the battery compartment cover.

1.
2.  Flip the ribbon across the battery 

compartment.

Standby mode
The parent unit is on standby mode when:

it is not connected to the AC power supply; and
there is no sound detected from the baby unit. 

The standby time varies depending on usage and 

the battery life. Ful  batteries can last up to 8 days.

Replace the batteries when:

LOW BATTERY light flashes on the parent unit.
The parent unit beeps twice every 30 seconds.
The batteries are properly instal ed into the 

parent unit, but the 

POWER/LINK light on 

the parent unit is off.

To clean and maintain this product:

Avoid putting it near heating appliances and devices 

that generate electrical noise (for example, motors or 

fluorescent lamps).
DO NOT expose it to direct sunlight or moisture.
Avoid dropping the product or treating it roughly.
Clean with a soft cloth.
DO NOT immerse the parent unit and the baby unit 

in water and do not clean them under the tap.
DO NOT use cleaning spray or liquid cleaners.
Make sure the baby unit and parent unit are dry 

before you connect them to the power supply.

This product operates with the maximum power 

allowed by the Federal Communications Commission 

(FCC). Even so, the baby unit and the parent unit can 

communicate over only a certain distance - which can 

vary with the locations of the baby unit, the parent 

unit, the weather, and the layout of your home.
When the parent unit is out of range, it will beep three 

times every 10 seconds and enter searching mode.
To improve reception, move closer to the baby unit 

(but not less than 1 meter / 3 feet).








General product care

Operating range

3.  Insert two AAA 

alkaline batteries into the 

battery compartment on top of the ribbon.

4.  Slide the battery compartment cover until it 

clicks into place.

Storage

When you are not going to use the baby monitor for 

some time, remove the batteries from the parent unit. 

Store the parent unit, the baby unit and the adapters 

in a cool and dry place.

ba

by

’s sa

fe

ty

 w

or

ld

Pa

re

nt

 U

ni

t

0.669603s