VTech 6767 User's Manual

VTech Landscape Lighting User's Manual - 6767.
Download
Page  of 2
4.5, 1523 votes
background image

Quick start guide

for models i6757/6767/6778/6779/6787/6789

NOTE: Use only the power adapters supplied with 

your VTech telephone or equivalent.

NOTE:

For complete feature instructions, please refer to your 

user’s manual.

96-006299-020-100  

issue 0

  STEP 1    Connect power to telephone base and  

 

chargers then connect telephone line  

 

to telephone base

Plug the connector into the power jack at the bottom 

of the telephone base and chargers then plug the 

power adapter into an electrical outlet not control ed 

by a wall switch.
Plug one end of the telephone line cord into the 

telephone line jack at the bottom of the telephone 

base. Then plug the other end of the cord into the 

modular wall telephone outlet.

  STEP 2    Install the battery 
•  Align  the  two  holes  in  the  plug  with  the  socket 

pins matching the color-coded label in the battery 

compartment  of  the  handset,  then  snap  the  plug 

securely into place.

•  Place the battery in the compartment with the wires 

in the upper right corner.

•  Position the battery compartment cover and slide it 

towards the unit until it clicks into place.

•  For optimal performance, we recommend that you 

charge the handset for 16 hours. Note that the new 

battery may have enough charge for some cal s.

STEP 3    Make, receive, and end calls
Make a call
•  Press 

/

FLASH or 

/

SPEAKER to ensure there 

is a dial tone, then dial the telephone number. 

 

 
  -OR-

For predialing: 
•  Dial the number (press 

MUTE/REMOVE or 

   

OFF/CLEAR  to  backspace,  or  press  and  hold 

REDIAL/PAUSE to insert a pause).
Press 

/

FLASH or 

/

SPEAKER if you want to 

use the speakerphone function.

Receive a call  
•  Press 

/

FLASH or 

/

SPEAKER or any dialing 

keys (

0-9, #, *) if you want to use the speakerphone 

function.

End a call
•  Press 

OFF/CLEAR,  or  put  the  handset  in  the 

telephone base or charger.

STEP 4    Set the answering system clock

Press 

CLOCK to listen to the current clock setting.

Press 

CLOCK again to change the settings.

Press 

/SKIP or  /REPEAT to change the year, 

hour, minute, or date.

When the correct setting is announced, press 

CLOCK 

to advance to the next setting.

STEP 5    Turn the answering system on and off
The answering system must be turned on to function. 

If the answering system is turned off, the telephone 

base light will be off.
To turn on/off the answering system:
•  Press 

ANS  ON/OFF  to  choose  between  on  and 

off.

STEP 6    Record outgoing announcement

                 (optional)

The  telephone  is  pre-programmed  with  the 

announcement “

Hel o, please leave a message after 

the tone

. To replace the default announcement:

•  Press 

ANNC  and  the  system  announces 

“Announcement, press 

PLAY or press RECORD.”

•  Press 

RECORD  to  record,  and  the  system 

announces 

“Record  after  the  tone.  Press 

STOP 

when you are done.”

•  After the tone, speak towards the microphone at the 

front right of the telephone base from about nine 

inches away.

•  Press 

/

PLAY/STOP  when  finished  and  the 

answering system will automatical y playback the 

newly recorded announcement. 

  STEP 7    Charge the battery

The battery may have enough charge for a short 

call. For best performance, charge the battery for at 

least 16 hours.
To charge the handset, place it in the telephone 

base or charger.
The 

CHARGE light on the telephone base or 

charger will be on when the handset is properly 

positioned. See 

Troubleshooting in the user’s 

manual if the 

CHARGE light is not on.

For installation and use of the belt clip and the wall 

mount bracket, please consult the user’s manual.

IMPORTANT!
If your product is not working properly:

Refer to the 

Troubleshooting section of your 

user’s manual.
Visit our website at www.vtechphones.com, or in 

Canada, www.vtechcanada.com.
Call our customer service at 1 (800) 595-9511 or      

1 (800) 267 7377 in Canada.

Related Manuals for VTech 6767

0.574536s