Viper VSS4000 Installation Manual

Viper Car Alarm Installation Manual - VSS4000.
Page  of 2
4.2, 1825 votes
background image

ADVSS4000 2009-09

Addendum: Installation Guide


The VSS4000 integrates the Viper 5101 Remote Start with the VSM100 Viper SmartStart Module. Read this addendum 

and both installation guides thoroughly before beginning. They will help you understand how to combine the two 

systems, avoid mistakes, and smoothly complete the installation, verification and customer registration processes.

The corrections made in this addendum address the 5101 installation guide (N4102V 2008-06) as it pertains to the 

VSN4000 kit. 

Installation guide 

Page #



Inside front 

cover & 31

Error is found in the Bitwriter® chip ver-

sion requirement: version 2.5 

The Bitwriter (p/n 998U) requires chip version 2.6 

or newer to program this unit.


What is included:

This list has changed to integrate two 

systems, see Correction column. 

The VSS4000 system includes:

One - 5101V remote start/keyless entry main 

module, Owner's & Installation guide, QR Wiring 

guide, (and supporting documentation).

One - five-button /1-way Supercode remote con-

trol (p/n 7153V)

One - Control Center with integrated Valet Over-

ride switch

One - Shutdown toggle switch

One - VSM100 Viper SmartStart module, wire 

harness, Quick reference User's & Installation 

guide. Module ID stickers.


Step 1 reads:

Hold....until you hear it emit a long 

beep. The transmit LED comes on solid.

Should read:

1.  Hold the 

A U 


 button on the remote until the 

transmit LED lights solid (approx. 10 seconds).

2.  Press and hold the 

A U 


 button until the LED 

blinks three times and then lights solid.


Remote starting diagnostics correction to 

introduction paragraph

Should be:

A few select system conditions may prevent the en-

gine from starting. The condition that causes this 

non-start will be reported by flashing the vehicle 

parking lights. The number of flashes and the list 

below identify the condition.