Uniden CEZ200 User's Manual

Uniden Telephone User's Manual - CEZ200.
Download
Page  of 2
4.7, 1662 votes
background image

Fold 

line

Fold 

line

Fold 

line

Fold 

line

Changes or modifications to this product not expressly approved by Uniden, or operation 

of this product in any way other than as detailed by the owner’s manual, could void your 

authority to operate this product.

Industry Canada (I.C.) Notice

Terminal equipment

NOTICE:This equipment meets the applicable Industry Canada Terminal Equipment Technical 

Specifications. This is confirmed by the registration number. The abbreviation, IC, before 

the registration number signifies that registration was performed based on a Declaration of 

Conformity indicating that Industry Canada technical specifications were met. It does not 

imply that Industry Canada approved the equipment.
NOTICE:The Ringer Equivalence Number (REN) for this terminal equipment is marked on the 

equipment itself. The REN assigned to each terminal equipment provides an indication of 

the maximum number of terminals allowed to be connected to a telephone interface. The 

termination on an interface may consist of any combination of devices subject only to the 

requirement that the sum of the Ringer Equivalence Numbers of all the devices does not 

exceed 5.

One-year Limited Warranty
Important: Evidence of original purchase is required for warranty service. WARRANTOR: 

UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, 

for one year, to the original retail owner, this Uniden Product to be free from defects in 

materials and craftsmanship with only the limitations or exclusions set out below. 
WARRANTY DURATION: This warranty to the original user shall terminate and be of no 

further effect 12 months after the date of original retail sale. The warranty is invalid if 

the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, 

altered, or used as part of any conversion kits, subassemblies, or any configurations not 

sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an 

authorized Uniden service center for a defect or malfunction covered by this warranty, (E) 

used in any conjunction with equipment or parts or as part of any system not manufactured 

by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's 

manual for this product. 
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty 

at any time while this warranty is in effect, warrantor will either, at its option, repair or 

replace the defective unit and return it to you without charge for parts, service, or any 

other cost (except shipping and handling) incurred by warrantor or its representatives in 

connection with the performance of this warranty. Warrantor, at its option, may replace the 

unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE 

AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES 

ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR 

ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES 

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES 

NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR 

CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of 

incidental or consequential damages so the above limitation or exclusion may not apply to 

you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other 

rights which vary from state to state. This warranty is void outside the United States of 

America and Canada. 
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the 

instructions in the owner's manual you are certain that the Product is defective, pack the 

Product carefully (preferably in its original packaging). The Product should include all parts 

and accessories originally packaged with the Product. Include evidence of original purchase 

and a note describing the defect that has caused you to return it. The Product should be 

shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Corporation  

Service Department 

4700 Amon Carter Blvd. 

Fort Worth, TX 76155

Trimline Phone User's Guide

What's in the box?

If any items are missing 

or damaged, contact 

our Customer Care Line 

immediately. Never use 

damaged products.
Need Help? You can get 

answers 24/7 at our 

website: www.uniden.com.

If You...

Contact Uniden’s...

Phone

have a question or problem

Customer Care Line*

800-297-1023

need a part or accessory

Parts Department*

800-554-3988

need special assistance due 

to a disability

Accessibility Help Line  800-874-9314 

 (voice or TTY)

* During regular business hours, Central Standard Time. Visit our website for detailed 

business hours.

Important safety precautions

When using your telephone equipment, always follow basic safety 

precautions to reduce the risk of fire, electric shock and injury to 

persons, including the following: 

Do not use this product near water, for example, near a bath tub, 

wash bowl, kitchen sink or laundry tub, in a wet basement or near a 

swimming pool. 
Avoid using a telephone (other than a cordless type) during an electrical 

storm. There may be a remote risk of electric shock from lightning. 
Do not use the telephone to report a gas leak in the vicinity of the leak. 

SAVE THESE INSTRUCTIONS 

Uniden works to reduce lead content in our PVC coated cords in our products and 

accessories.

Warning! The cords on this product and/or accessories contain lead, 

a chemical known to the State of California to cause birth defects or 

other reproductive harm. Wash hands after handling.

Uniden® is a registered trademark of Uniden America Corporation.
The pictures in this manual are used for examples only. Your actual phone may not look 

exactly like the pictures.

Connecting the Phone

Test the connection

Pick up the handset and listen for a dial tone. If you don't hear 

one, check the connection between the base and the phone jack.
Make a test call. If the dial won't stop when you dial, check the 

Tone/pulse switch: if it’s on tone, change it to pulse, and vice 

versa. Try your test call again. 

If there is static or noise on the line, see the section on Solving 

Problems. 

1)

2)

Use the coiled cord to 

connect the handset 

to the base (use the 

jack marked with the 

handset icon).

Use the telephone 

cord to connect the 

line jack to a standard 

telephone wall jack.

Route the 

cord through 

the channel.

Route the 

cord through 

the channel.

Use the coiled cord to 

connect the handset 

to the base (use the 

jack marked with the 

handset icon).

Use the telephone 

cord to connect the 

line jack to a standard 

telephone wall jack.

Route the 

cord through 

the channel.

Route the 

cord through 

the channel

Base

Telephone 

cord

Coiled 

handset cord

Handset

Front (top panel)

Back (bottom panel)

Folded inside

Page 1 (outside)

0.623595s