Troy-Bilt CSV206 User's Manual | Page 10
10
SECTION 6: MAINTAINING YOUR CHIPPER SHREDDER VACUUM
Lubrication
•
Wheels: Lubricate the rear wheels with light oil
once a season.
•
Nozzle Door Adjustment Levers: Lubricate each
adjustment lever once a season with light oil.
•
Front Caster Wheels: Grease fittings are located
on the front caster wheels to provide easy
lubrication of the swivel pins.
Cleaning the Flail Screen
If the discharge area becomes clogged, remove the flail
screen and clean area as follows:
•
Stop the engine and make certain the chipper
shredder vacuum has come to a complete stop.
•
Disconnect spark plug wire from spark plug and
ground against the engine.
•
Remove the vacuum bag and tamper plug from the
equipment and save.
•
Remove the four self-tapping screws from the
bottom of the discharge chute, and the hex bolt, flat
washer and hex nut from the top. Remove the
discharge chute assembly. See Figure 11.
Figure 11
•
Remove the two hex bolts and hex nuts which
extend through the impeller housing. Lift the flail
screen from inside the housing. See Figure 12.
•
Clean the flail screen by scraping and/or washing
with water, and reinstall the screen.
NOTE: Be certain to reassemble the flail screen with
the curved side down.
•
Reattach the discharge chute assembly with the
hardware previously removed and attach the bag to
the unit.
Figure 12
Servicing the Blades
NOTE: When tipping the unit, empty the fuel tank and
keep the spark plug side up.
•
Disconnect the spark plug wire and ground it
against the engine.
•
Remove the flail screen as instructed in the
previous section.
•
Remove plastic belt cover from front of the engine
by removing the two self-tapping screws. See
Figure 13.
•
Remove the access plate by removing two hex lock
nuts. See Figure 13.
•
Locate one of the chipper blades in the access
opening by rotating the impeller assembly by hand.
Remove the chipper blade using a 3/16” allen
wrench and a 1/2” wrench.
•
Remove other blade in the same manner to replace
or sharpen.
Figure 13
WARNING: Before performing any
maintenance or repairs, stop the engine, wait
until the machine comes to a complete stop,
disconnect the spark plug wire and ground
against the engine to prevent unintended
starting.
Discharge
Chute
Hex Bolt
Flat Washer
Hex Nut
Self-Tapping
Screws
Flail Screen
Hex Bolts
Hex Nuts
Belt Cover
Self-Tapping
Screws
Access Plate
Lock Nuts
Also See for Troy-Bilt CSV206
Related Manuals for Troy-Bilt CSV206
-
Craftsman Chipper 486.24516 Operator's Manual
32 pages
-
Craftsman Chipper 247.795861 Operator's Manual
16 pages
-
Craftsman Chipper 247.77636 Operator's Manual
40 pages
-
GBC Chipper SHREDMASTER 1666S User's Manual
10 pages
-
Snapper Chipper LS5000 User's Manual
4 pages
-
Troy-Bilt Chipper CS 4310 User's Manual
1 pages
-
Troy-Bilt Chipper CSV 060 User's Manual
1 pages
-
Troy-Bilt Chipper 47330 User's Manual
27 pages
-
Echo Chipper Bear Cat CH922DH (74950) User's Manual
2 pages
-
Echo Chipper SC3305 (70080) User's Manual
2 pages
-
Echo Chipper SHRED'N'VAC ES-210 User's Manual
24 pages
-
MTD Chipper 242A645-000 User's Manual
12 pages
-
MTD Chipper 244-645B000 User's Manual
10 pages
-
Sears Chipper 247.79586 User's Manual
24 pages
-
Country Home Products Chipper C123E-CHP User's Manual
32 pages
-
EarthQuake Chipper 9060300 User's Manual
44 pages
-
Echo Bear Cat Chipper 70050 User's Manual
1 pages
-
Echo Bear Cat Chipper 70080 User's Manual
1 pages
-
Echo Bear Cat Chipper 70085 User's Manual
1 pages
-
Echo Bear Cat Chipper 70554 User's Manual
1 pages
-
Echo Bear Cat Chipper CH4614 (73420) User's Manual
2 pages
-
Echo Bear Cat Chipper CH611DH (76628) User's Manual
2 pages
-
Echo Bear Cat Chipper SC3206 User's Manual
1 pages
-
Echo Bear Cat Chipper SC3270T (70580) User's Manual
2 pages