TP-Link TL-WA750RE Quick Installation Guide

TP-Link Network Router Quick Installation Guide - TL-WA750RE.
Download
Page  of 2
4.6, 1164 votes
background image

Press the         button.

1

2

3

2

1

3

Plug in next to your Router.

3LEDs

1

2

3

4

5

The ideal location for your extender is halfway between your 
wireless router and wireless devices.

Make sure your extender is in a location where a 
minimum of 3 signal strength LEDs are lit.

Keep the extender away from

 devices like cordless 

phones, Bluetooth devices and microwave ovens to 
minimize wireless interference.

If possible, try to place your extender in open corridors 
or spacious locations

 rather than a crowded room.

far away

on

blinking

After the extender is relocated to a new place,

 the extender will reconnect to your router automatically in about one minute.

LED Legend

Quick Setup using the WPS Button

TL-WA850RE 

Applicable Models: 

Option TWO: 

Setup using your Web Browser

WPS

Option ONE: 

Quick Setup using the WPS Button

Press the WPS button.

If the RE LED does not go from blinking to solid ‘on’, please use Option TWO.

      Wait until the 
Wireless LED 
starts blinking.

Wireless

RE

Wireless

Power

Ethernet

Bad

Good

Best

Option ONE

Quick 

Installation 

Guide

Your router must support WPS

      The RE LED 
should go from 
blinking to solid ‘on’. 

Frequently Asked Questions (FAQ)

The Range Extender shares your router’s Wireless Network Name (SSID)  
and Wireless Password. 

Password (ABCDEF)

SSID (TP-LINK_XXX)

Password (ABCDEF)

SSID (TP-LINK_XXX)

Power on

Relocate

Connect

Enjoy!

710650X

XX

X    RE

VX.X.X 

Wireless

Power

Ethernet

Blinking: 

The wireless function is 

working properly.

On: 

The Range Extender is on.

On: 

The Ethernet port is 

connected.
Blinking: 

The Ethernet port  is 

transmitting data.
Off: 

The Ethernet port is not 

connected.

RE 

On: 

The Range Extender is 

connected to your router.
Blinking: 

The Range Extender 

is establishing a connection 
with your router.
Off: 

The Range Extender is not 

connected to your router.

On: 

The number of lit LEDs 

indicates the strength of wireless 
signal.
Blinking: 

A connection to your 

router has been established, but 
no Internet access yet.
Off: 

The Range Extender is not 

connected to your router.

      (Signal Strength)

on

blinking

RE

A:

 Please use Option TWO

 to set up the Range Extender.

A:

 You may have typed in the wrong wireless password for your router. Please reset the Range 

Extender, double check your router’s wireless password and set up the Range Extenger again.

Q1. What should I do if my router doesn’t have a WPS button?

Q2. Why doesn’t the RE LED light up after I finish Option TWO?

A: 

First, make sure your computer is connected to the extender network and disconnected from any 

other network. Second, make sure your computer is set to  Obtain an IP address automatically.

Q3. Why can't I see the login page after entering 

http://tplinkextender.net in the browser?

A:

 While the Range Extender is plugged in, use a pin to press the RESET button 

for 2 seconds (refer to the diagram). Wait 5 seconds until all the LEDs flash once.

Q4. How do I reset the Range Extender?

RESET

RESET

ETHERNET

Related Manuals for TP-Link TL-WA750RE

0.495604s