Toshiba TOSVERT VF-S9 User's Manual | Page 6

Toshiba Network Card User's Manual - TOSVERT VF-S9.
Download
Page  of 17
4.1, 2324 votes
background image

E6580757

2

I

■ General operation

      Danger

See item

Disassembly

prohibited

• Never disassemble, modify or repair. This can result in electric shock, fire and injury. For

repairs, call your sales agency.

2.

Prohibited

• Never remove the front cover when power is on or open door if enclosed in a cabinet. The

unit contains many high voltage parts and contact with them will result in electric shock.

• Don't stick your fingers into openings such as cable wiring hole and cooling fan covers.

This can result in electric shock or other injury.

• Don't place or insert any kind of object into the inverter (electrical wire cuttings, rods,

wires). This can result in electric shock or fire.

• Do not allow water or any other fluid to come in contact with the inverter. This can result in

electric shock or fire.

2.1

2

2.

2.

Mandatory

• Turn power on only after attaching the front cover or closing door if enclosed in a cabinet.

If power is turned on without the front cover attached or closing door if enclosed in a cabi-
net. This can result in electric shock or other injury.

• If the inverter begins to emit smoke or an unusual odor, or unusual sounds, immediately

turn power off.
If the equipment is continued in operation in such a state, the result may be fire. Call your
local sales agency for repairs.

• Always turn power off if the inverter is not used for long periods of time since there is a

possibility of malfunction caused by leaks, dust and other material.
If power is left on with the inverter in that state, it may result in fire.

2.1

3.

3.

     Warning

See item

Prohibited

contact

• Do not touch heat radiating fins or discharge resistors. These device are hot, and you'll

get burned if you touch them.

3.

Prohibited

• Avoid operation in any location where there is direct spraying of the following solvents or

other chemicals. The plastic parts may be damaged to a certain degree depending on
their shape, and there is a possibility of the plastic covers coming off and the plastic units
being dropped.
If the chemical or solvent is anything other than those shown below, please contact us in
advance.

1.4.4

(Table 1)

Examples of applicable chemicals
and solvents

Chemical

Solvent

Hydrochloric acid
(density of 10% or less)

Methanol

Sulfuric acid (density of
10% or less)

Ethanol

Nitric acid (density of
10% or less)

Triol

Caustic soda

Mesopropanol

Ammonia

Glycerin

Sodium chloride (salt)

(Table 2)

Examples of unapplicable
chemicals and solvents

Chemical

Solvent

Phenol

Gasoline, kero-
sene, light oil

Benzenesulfonic
acid

Turpentine oil

Benzol
Thinner

Also See for Toshiba TOSVERT VF-S9

0.517626s