Toshiba MD-0101 Operator's Manual

Toshiba Copier Operator's Manual - MD-0101.
Download
Page  of 22
4.2, 1732 votes
background image

General Precautions for Installation/Servicing/Maintenance for the MD-0101

The installation and service should be done by a qualified service technician.

1.

When installing the MD-0101 to the Plain Paper Copier, be sure to follow the instructions described in

the “Unpacking/Set-Up Procedure for the MD-0101” booklet which comes with each unit of the

MD-0101.

2.

The MD-0101 should be installed by an authorized/qualified person.

3.

Before starting installation, servicing or maintenance work, be sure to turn off and unplug the copier

first.

4.

When servcing or maintaining the MD-0101, be careful about the rotating or operation sections such

as gear, pulleys, sprockets, cams, belts, etc.

5.

When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise

noted in this manual or other related materials. Be careful not to reassemble small parts such as

screws, washers, pins, E-rings, toothed washers to the wrong places.

6.

Basically, the machine should not be operated with any parts removed or disassembled.

7.

Delicate parts for preventing safety hazard problems (such as breakers, thermofuses, fuses, door

switches, sensors, etc. if any) should be handled/installed/adjusted correctly.

8.

Use suitable measuring instruments and tools.

9.

During servicing or maintenance work, be sure to check the serial No. plate and other cautionary

labels (if any) to see if they are clean and firmly fixed. If not, take appropriate actions.

10. The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband,

because the ICs on it may be damaged due to static electricity. Before using the wrist band, pull out

the power cord plug of the copier and make sure that there is no uninsulated charged objects in the

vicinity.

11. For the recovery and disposal of used MD-0101, consumable parts and packing materials, it is

recommended that the relevant local regulations/rules should be followed.

12. After completing installation, servicing and maintenance of the MD-0101, return the MD-0101 to its

original state, and check operation.

Copyright 2000

TOSHIBA TEC CORPORATION

0.492837s