Toshiba Digital Photo Keychain XVSe16-240-X Hardware manual | Page 28

Toshiba Digital Photo Keychain Hardware manual - Digital Photo Keychain XVSe16-240-X.
Download
Page  of 35
4.1, 2021 votes
background image

 

 

28 

 
Connecting Control Outputs 
Each XVSe has 4 Control Outputs. These outputs can be used to trigger devices such as Sirens, Phone Dialers, Lights, and any other relay 

activated device.  There is no power supplied to the ports. Use an external power supply if necessary. 

 

Use 12V, below 300mA. For control ing lights or other devices, use another external relay. 
Maximum voltage is 24V AC @ 1 amp 
Output uses a Form C Relay 
 
Looping Outputs 
The XVSe has 16 Looping outputs. Depending on the destination of the outputs, each output may have to be terminated.  The outputs are 

located on the BNC Connector Cable.  At ach the cable to the input for the BNC Connector Cable highlighted below. 

 

 
The video inputs are 75 Ώ BNC connectors. Make sure there is a video source connected to the input and then connect a cable to the Channel 

Out on the BNC Connector Cable. The looping outs can be connected to video monitors or combined with adapters to connect to VCR’s. 
 

(+) 

(-) 

Siren, Alarm, Outside Relays 

External Po

wer Supply (DC 12V) 

0.503023s