Toshiba 3LCD Quick Start Manual

Toshiba Projectors Quick Start Manual - 3LCD.
Download
Page  of 2
4.8, 1254 votes
background image

1

2

OPERATIONS

3LCD DATA PROJECTOR

QUICK REFERENCE CARD

Projecting a Picture

• Connect external equipment

such as a computer or
video tape player.

• Connect the power cord to

the projector.

Press ON/STANDBY.

Both the ON and LAMP indications light up
in green.

Turn on the connected equipment
and put it in playback mode.

5

Press INPUT to select the
input source.
Video:

VIDEO input picture

RGB:

RGB input picture

CAMERA: Camera input picture

Adjust the picture size and
focus.

Zoom ring: Adjust the picture size.
Focus ring: Focus the picture.

4

3

1

2

Turning Off the Power After Use

Put the connected equipment
in the stop mode.

Press ON/STANDBY.
An instruction message appears.

Press ON/STANDBY again.

(Power turns off and then the lamp goes off.)

After confirming the exhaust fan
stops, unplug the power cord.

3

For more informations about usage and operations, see the owner’s manual.

“Camera” function is equipped only with the model which has a document imaging camera model.

4

ON/STANDBY

INPUT

ON/STANDBY

ON/STANDBY

4) Open the camera head.

5) Turn the camera head.

6) Pull up the light.

7) Turn the light.

1

Projecting Images with the Document Imaging Camera

3

4

Press ARM LIGHT.

The light turns on.

Place a document onto or
around the projector, and turn
the camera head to direction
of the document.

Press CAMERA.

The appeared image is a projected one
through the camera.

Move the camera head to
adjust the size of the picture,
and focus on the picture by
turning the focusing ring on
the camera head.

2

5

After using, return the arm to the original position in the
reverse order.

1) Raise up the arm.

2) Stretch the arm.

3) Turn the arm.

ARM LIGHT

CAMERA

Up : to reduce.

Down : To enlarge.

Focusing ring
N : Near
F : Far

0.531745s