Toro Precision Series Spray Nozzles Sell Sheet

Toro Spray Head Nozzles Sell Sheet - Precision Series Spray Nozzles.
Download
Page  of 4
4.5, 2363 votes
background image

Precision™ Series

Spray Nozzle

Sprays

Toro’s Precision™ Series Spray Nozzles are the most 

complete and efficient spray nozzle line available to help 

irrigation professionals manage water use, eliminate runoff and 

reduce customer water bills. The Precision™ Spray nozzles 1”/

hr. precipitation rate ensures that water is applied more slowly 

and evenly without sacrificing landscape health. These nozzles 

are available in a wide selection of arcs and radii, as well as male 

and female threads, making them ideal for large scale installations 

and retrofits. The Precision™ Series Spray Nozzles are now also 

available in pressure-compensating versions, further enhancing 

the best-in-class spray nozzle in the industry.

Male- or Female-threaded

Nozzles Fit Toro®, Irritrol®

Rain Bird® and Hunter®

Spray Bodies

Features & Benefits

Patented H²0 Chip Technology

Using patented H²0 chip technology – and no moving parts – each 

Precision Series Spray nozzles creates one or more high frequency oscillating streams to 

achieve the desired arc and radius with 1/3 less water usage.

Maximize Irrigation Efficiency

Precision Spray nozzles deliver an industry first 1”/hr (25mm/hr) precipitation rate, 

which better matches soil infiltration rate. This lower precipitation rate, along with high 

distribution uniformity make this nozzles family the most 

efficient nozzle from 5’-15’ (1,5-4,6m).

Pressure-Compensating Versions Available

Pressure-Compensating Precision™ Series Spray Nozzles maintain 1”/hr (25mm/hr.) 

precipitation rate and minimizes misting up to inlet pressures to more than 40 PSI, 

minimizing the need for a regulating head, at fraction of the cost.

Design and Retrofit Effectiveness

The lower flow rate of Precision Series spray nozzles maximizes design 

efficiency and saves on overall material costs by using fewer valves and less 

controller stations. In addition, existing systems with low pressure can be fixed with 

a simple retrofit of the existing high-flow nozzle.

Third-Party Performance Validation

Precision™ Series Spray nozzles (non-Pressure-Compensating versions only) have 

been tested and validated in the field and at the Center for Irrigation Technology (CIT). 

Pressure Compensation Device

The elastomeric PCD disk opens and closes 

in response to changes in inlet pressure 

to maintain optimal performance, even 

when the pressure rises higher than 40 psi. 

The Pressure-Compensating versions are 

indicated by the red stamped Toro logo, 

while the non-Pressure-Compensated 

versions are indicated by the white 

stamped Toro logo.

No Moving or Sonic Welded Parts

Assures no variation at the end of the water 

arc for better edge definition and consistent, 

reliable performance.

The Patented H²O Chip

Competitor’s High Flow Nozzle:

12H Nozzle at 50 PSI = 1.83GPM 

or 2.45”/hr.*  

PSN with PCD Nozzle: 

12H Nozzle at 50 PSI = 0.74 GPM 

or 1”/hr.*

*Based on internal flow rate test data in Riverside, CA.

Up To

60% Less 

Water!

PSN with PCD Performs 

Under Pressure!

Also See for Toro Precision Series Spray Nozzles

0.597409s