Toro 68040 Operator's Manual

VIB-1 Concrete Vibrator (serial 313000001 - 313999999)
Download
Page  of 12
4.4, 1703 votes
background image

Form No. 3377-550 Rev B

VIB-1, VIB-1.5, VIB-2, and VIB-3 Concrete Vibrator
Model No. 68040—Serial No. 313000001 and Up

Model No. 68041—Serial No. 313000001 and Up

Model No. 68042—Serial No. 313000001 and Up

Model No. 68044—Serial No. 313000001 and Up

Operator's Manual

If, after carefully reading this manual, you still have questions or
problems, call toll free 1-800-808-2963 (US) or 1-800-808-3072 (Canada)
before returning this product.

WARNING

CALIFORNIA

Proposition 65 Warning

This product contains a chemical or chemicals

known to the State of California to cause cancer,

birth defects, or reproductive harm.

Use of this product may cause exposure to

chemicals known to the State of California

to cause cancer, birth defects, or other

reproductive harm.

General Power Tool
Safety Warnings

WARNING Read all safety warnings and all instructions. Failure

to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your
mains-operated (corded) power tool.

1.

Work area safety

A.

Keep work area clean and well lit. Cluttered or dark
areas invite accidents.

B.

Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. 
Power tools create sparks
which may ignite the dust or fumes.

C.

Keep children and bystanders away while operating
a power tool. 
Distractions can cause you to lose
control.

2.

Electric safety

A.

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.

B.

Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. 
There is an increased risk of electric
shock if your body is earthed or grounded.

C.

Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.

D.

Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. 
Damaged or entangled cords increase
the risk of electric shock.

E.

When operating a power tool outdoors, use an
extension cord suitable for outdoor use. 
Use of a
cord suitable for outdoor use reduces the risk of electric
shock.

F.

If operating a power tool in a damp location is
unavoidable, use a ground fault interrupter (GFCI)
protected supply. 
Use of an GFCI reduces the risk of
electric shock.

3.

Personal safety

A.

Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. 
A moment
of inattention while operating power tools may result
in serious personal injury.

B.

Use personal protective equipment. Always wear
eye protection. 
Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.

C.

Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. 
Carrying power tools with your finger on the
switch or energizing power tools that have the switch
on invites accidents.

D.

Remove any adjusting key or wrench before turning
the power tool on. 
A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.

© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

*3377-550* B

0.588674s