Toro 2606 Operator's Manual | Page 10

HoverPro 550 Machine (serial 314000001 - 314000372)
Download
Page  of 20
4.6, 1807 votes
background image

g017340

Figure 10

Checking the Engine Oil
Level
Service Interval: 
Before each use or daily

1.

Move the machine to a level surface.

2.

Remove the dipstick and wipe it with a clean
cloth.

3.

Insert, but do not screw in, the dipstick into the
oil fill hole.

4.

Remove the dipstick and check it.

5.

To determine the proper oil level on the dipstick,
refer to Figure 11).

g017332

Figure 11

1.

The oil level is at its
maximum.

3.

The oil level is too
low—add oil to the
crankcase.

2.

The oil level is too
high—remove oil from
the crankcase.

6.

If the oil level is low, slowly pour oil into the oil
fill hole, wait 3 minutes, and check the oil level
on the dipstick by wiping the dipstick clean and
then inserting, but not screwing in, the oil fill
cap into the hole.

Note: Max. fill: 0.59 l (20 oz.) Multigrade
Mineral 10W-30 oil with an API service
classification of SF, SG, SH, SJ, SL, or higher.

Note: Fill the engine crankcase with oil until
the dipstick indicates that the engine oil level
is correct as shown in Figure 11. If you overfill
the engine with oil, remove the excess oil as
directed in Changing the Engine Oil.

7.

Install the dipstick and hand tighten it securely.

Important: Change the engine oil after the
first 5 operating hours
; change it yearly
thereafter. Refer to Changing the Engine Oil.

10

 

0.657656s