Toro 23803 Quick Start Guide

2226 Directional Drill (serial 400000000 - 999999999)
Download
Page  of 32
4.8, 1050 votes
background image

Form No. 3412-311 Rev A

2226 Directional Drill
Model No. 23803—Serial No. 400000000 and Up

Quick Start Guide

This machine is a prototype unit.

Safety
Improper use or maintenance by the operator can
result in injury. To reduce the potential for injury,
comply with these safety instructions and the safety
instruction throughout this document, denoted by the
safety-alert symbol

, which means:

Caution, Warning,

or

Danger—personal safety instruction. Failure to

comply with the instruction may result in personal injury
or death.

This product is capable of amputating hands and feet. Follow
all safety instructions to avoid serious injury or death.

The owner/user can prevent and is responsible for accidents
or injuries occurring to people, or damage to property.

Important: Before operating in an area with
high-voltage lines or cables, contact a “One-Call System
Directory” service. In the USA, call 811 or your local
utility company. If you do not know your local utility
company’s phone number, call the national number
(USA and Canada only) at 1-888-258-0808. Also, contact
any utility companies that are not participants of the
“One-Call System Directory” service.

Read and understand the contents of the manual before
you start the machine. Make sure everyone using this
machine knows how to use it and understands the
warnings.

Do not put hands or feet near moving components on
the machine.

Keep bystanders a safe distance from the machine.

Do not operate machine without all guards and other
safety protective devices in place and working on the
machine.

Keep children out of the operating area and under the
watchful care of a responsible adult other than the
operator. Never allow children to operate the machine.

Shut the machine off before servicing, fueling, or
unplugging.

Training

Read the Operator's Manual and other training material.

Note: If the operator(s) or mechanic(s) cannot read
English, it is the owner's responsibility to explain this
material to them.

Become familiar with the safe operation of the equipment,
operator controls, and safety signs.

All operators and mechanics should be trained. The
owner is responsible for training the users.

Do not let children or untrained people operate or service
the equipment. Local regulations may restrict the age of
the operator.

Preparation

Evaluate the terrain to determine what accessories and
attachments are needed to properly and safely perform
the job. Only use accessories and attachments approved
by the manufacturer.

Wear appropriate clothing; including a hard hat, safety
glasses, long pants, safety shoes, and hearing protection.

Tie back long hair. Do not wear jewelry. Secure loose
clothing.

Inspect the area where the equipment is to be used and
ensure that all objects are removed from the machine
before use.

Use extra care when handling fuels. They are flammable
and vapors are explosive.

Use only an approved container.

Do not remove the fuel cap or add fuel with the
engine running. Allow the engine to cool before
refueling. Do not smoke near the machine when the
engine is running.

Do not refuel or drain the machine indoors.

Check that the operator's presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they are
functioning properly.

© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

*3412-311* A

 

0.603356s