Toro 20374 Operator's Manual | Page 8

22in Recycler Lawn Mower (serial 312000001 - 312999999)
Download
Page  of 44
4.8, 1067 votes
background image

Adjusting the Cutting Height

WARNING

Adjusting the cutting height may bring you into
contact with the moving blade, causing serious
injury.

Stop the engine and wait for all moving parts
to stop.

Do not put your fingers under the housing when
adjusting the cutting height.

CAUTION

If the engine has been running, the muffler will be
hot and can severely burn you. Keep away from the
hot muffler.

Adjust the cutting height as desired. Set the front wheels
to the same height as the rear wheels (Figure 9).

Note: To raise the mower, move the front cutting
height levers rearward and the rear cutting height levers
forward. To lower the mower, move the front cutting
height levers forward and the rear cutting height levers
rearward.

Figure 9

1.

Raise the mower

2.

Lower the mower

Note: The cutting height settings are 1 inch (25 mm);
1-3/8 inches (35 mm); 1-3/4 inches (44 mm); 2-1/8
inches (54 mm); 2-1/2 inches (64 mm); 2-7/8 inches (73
mm); 3-1/4 inches (83 mm); 3-5/8 inches (92 mm); and
4 inches (102 mm).

Starting the Engine
1. Hold the blade control bar against the handle

(Figure 10).

Figure 10

1.

Blade control bar

2. Turn the ignition key (Figure 11) (electric-start

models only) or pull the recoil start handle
(Figure 12).

Note: When you pull the recoil start handle, pull it
lightly until you feel resistance, then pull it sharply
(Figure 12). Allow the rope to return to the handle
slowly.

Figure 11

8

0.647297s