Toro 131-2813 Installation Instructions

Transmission Filter Kit, RT1200 Traction Unit
Download
Page  of 4
4.1, 1461 votes
background image

Form No. 3395-439 Rev A

Transmission Filter Kit
RT1200 Traction Unit
Model No. 131-2813

Installation Instructions

WARNING

CALIFORNIA

Proposition 65 Warning

This product contains a chemical or chemicals known to the State of California to

cause cancer, birth defects, or reproductive harm.

Installation

Loose Parts

Use the chart below to verify that all parts have been shipped.

Description

Qty.

Use

No parts required

Prepare the machine.

Filter

1

Change the transmission filter.

No parts required

Check the transmission filter for leaks.

Preparing the Machine

1.

Park the machine on a level surface.

2.

Lower all attachments, stop the engine, and remove
the key.

3.

Remove the right-side panel; refer to Operator’s Manual
for the machine.

4.

Rotate the BATTERY-DISCONNECT switch to the Off
position; refer to Operator’s Manual for the machine.

5.

Allow the machine to cool 10 to 20 minutes.

Changing the Transmission
Filter

Changing the Filter

Note: You can access the transmission filter from underneath
the right side of the machine, inboard of the hydraulic tank.

1.

Place a drain pan under the transmission-oil filter
(Figure 1).

© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

*3395-439* A

 

0.576531s