Toro 119-7844 Installation Instructions

Kawasaki Engine Conversion Kit, Suzuki-Powered Heavy-Duty Lawn Mowers with Zone Start
Download
Page  of 4
4.9, 1778 votes
background image

Form No. 3365-741 Rev A

Kawasaki Engine Conversion Kit, Suzuki-Powered
Heavy-Duty Lawn Mowers with Zone Start

Model No. 119-7844

Installation Instructions

Installation

Loose Parts

Use the chart below to verify that all parts have been shipped.

Procedure

Description

Qty.

Use

Belt cover (74-1770)

1

Engine (117-5220)

1

Decal (110-0520)

1

Screw (95-1727)

4

Blade retainer spacer (103-3795)

1

Tank bracket (115-0954-03)

1

Fuel tank cap (93-7198)

1

Screw (104-2628)

3

Fuel hose (109-0296)

1

Fuel filter (71-9280)

1

Clamp (2412-98)

4

Fuel hose (109-0650)

1

Cable tie (3290-378)

4

Blade bolt

1

BBC spacer

1

Spring washer

2

2

Throttle control (117-3543)

1

Install the new engine.

1

Removing the Old Engine

No Parts Required

Procedure

Important: Save all fasteners that you removed for
reuse unless otherwise noted.

1. Drain the fuel from the fuel tank.

2. Remove the old belt cover and discard it.

3. Remove and discard the throttle control cable.

4. Remove and discard the old fuel hose, fuel filter,

and clamp.

5. Remove the blade and the BBC assembly.

6. Remove the belt from the driver pulley; inspect the

belt for wear and replace it if necessary.

7. Remove the engine mounting bolts.

8. Remove the old engine from the mower housing.

9. Remove the fuel tank from the tank base and retain

it for reuse.

10. Replace the fuel tank cap with a new cap provided in

the kit; discard the old fuel tank cap.

11. Remove and discard the discharge tunnel door.

12. Clean the mower housing and check it for damage

and wear.

© 2010—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

0.565918s