Toro 108-7318 Installation Instructions

Clutch-Drive Hex Shaft Service Kit, 2005 and Before Power Max Snowthrower
Download
Page  of 4
4.3, 2316 votes
background image

Form No. 3354-345 Rev A

Chain-Drive Hex Shaft Service Kit

Clutch-Drive Hex Shaft Service Kit

For 2005 and Before Power Max® Snowthrowers
Model No. 108-7317
Model No. 108-7318

Installation Instructions

Figure 1

1. Bearing retainer (2)

4. Screw

7. Roll pin

10. Hex shaft

2. Bushing spacer (chain drive

kit only)

5. Keyway

8. Rubber friction wheel

3. Sprocket

6. Square key

9. Hex trunnion

Instructions
Note: 
In Figure 1 above, A is the chain-drive hex
shaft service kit and B is the clutch-drive hex shaft
service kit.

1. Disassemble the traction drive assembly.

Note: Refer to service manual 492-9138.

2. Remove the rubber friction wheel from the

old hex shaft assembly (if you are using it with
the kit).

3. Mount the rubber friction wheel on the new

hex trunnion using the hardware from the old
assembly, ensuring that the rubber wheel is
oriented over the trunnion.

© 2005—The Toro® Company

8111 Lyndale Avenue South

Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA.

All Rights Reserved

0.558997s