Toro 106-8559 Installation Instructions

Bagging Blade Kit, 2003 and After DH Series Lawn Tractors
Download
Page  of 1
4.9, 2243 votes
background image

Form No. 3329-388 Rev A

Bagging Blade Kit
DH Series Lawn Tractors, 2003 and After
Model No. 106-8559

Installation Instructions

Removing the Blades

No Parts Required

The blade is sharp; contacting the blade can
result in serious personal injury.

Wear cloth or leather gloves when servicing the
blade.

1. Remove the mower from the tractor; refer to

Removing the Mower in the Operator’s Manual.

2. Carefully tip the mower over.

3. Remove the blades and all blade mounting hardware.

Wedge a block of wood between each blade and the
mower to lock the blade while you are removing
each blade bolt.

Note: The right blade is held by a left-hand
threaded bolt.

4. Inspect all parts and replace any that are worn or

damaged.

5. Keep the spacers and washers with the existing

blades.

6. Use the keys, shear pins, and blade bolts for installing

the bagging blades.

Installing the Bagging Blades

Parts needed for this procedure:

2

Spacer (Part No. 106-6531)

1

Right bagging blade (Part No. 105-8560)

1

Left bagging blade (Part No. 105-8561)

Important: The new spacers are slightly thicker
than the existing spacers and are to be used only
with the bagging blades.

1. Install the keys, new spacers, shear pins, bagging

blades, new blade stiffeners, new washers, and blade
bolts (Figure 1).

Note: Install the bagging blades 90° apart to
prevent them from contacting each other.

Figure 1

1.

Key

5.

Blade

2.

Blade driver

6.

Blade stiffener

3.

Spacer

7.

Washer

4.

Shear pins

8.

Blade bolt

2. Use a torque wrench to tighten the blade bolt to

37 ft-lb (50 N-m).

3. Install the mower onto the tractor; refer to Installing

the Mower in the Operator’s Manual.

Note: You should leave the recycling door on
the housing. The recycling performance using the
bagging blades may decrease because the blades
carry more grass in the housing.

© 2009—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

Related Manuals for Toro 106-8559

0.615971s