Thermo Products Thermo Pride Furnace MHA1-75N User's Manual | Page 44

Thermo Products Furnace User's Manual - Thermo Pride Furnace MHA1-75N.
Download
Page  of 61
4.8, 1781 votes
background image

All installations and services must be performed by qualified service personnel. 
 

41 

IMPORTANT: Remind homeowner of the importance of monthly filter inspections 
during operation to ensure maximum efficiency. 

 
 
 

VI. Installers Instructions to User 

 

After completing the installation, the installer shall inform and/or demonstrate to 
the homeowner:  
 

1.  The location of these instructions in the furnace and that these instructions and 

the users information manual must be kept along with instructions for any 
accessories in the plastic pouch on the inside of the furnace. 

 
2.  The location and use of the manual gas shut off valve and furnace electrical 

disconnect switch. Instruct user to always shut off gas before shutting off electric 
power. 

 
3.  The sequence of operation of the furnace. 
 
4.  The correct operation and maintenance of the appliance as outlined in the users 

information manual. 

 

5. That failure to maintain and operate this furnace in accordance with these 

instructions could result in hazardous conditions, bodily injury, and property 
damage and may void the limited warranty on the furnace. 
 

6. Review with and encourage the user to read the warnings and instructions 

outlined on the front cover and the Safety section of this manual and in the Users 
Information Manual. 
 

7.  Recommend to the user that a CO detector be installed in the living space with 

the use of any fossil fuel burning appliance. The CO Detector should be one that 
is design certified by a nationally recognized testing agency. 

 

8.  Recommend that the user have a qualified heating contractor inspect the furnace 

at the start of each heating season. Inform the user of the frequency of 
inspection required for each item in Section IV of the Users Manual. 
 

9.  Inform the user to maintain adequate clearances around air openings into the 

furnace and not to block or restrict the entrance of air into the furnace area or the 
furnace air opening.      

 
 
 

 

0.580894s