Technics SL-1200MK2 Owner's Manual | Page 5
RQT7018
5
1 Fit the turntable and turntable mat.
Put the turntable on the center spindle and then lay the mat
on top.
•Be very careful when putting the turntable on the main unit.
The magnet on the bottom of the turntable is finely adjusted
and sharp contact can cause it to move and lead to poor
operation. Ensure the magnet remains free from dust and
iron particles.
•Do not adjust the screws attaching the magnet to the turn-
table. The rated performance of the unit cannot be guaran-
teed if the magnet is moved.
2 Attach the head shell.
Fit the head shell into the tone arm, keep it horizontal and
tighten the locking nut.
3 Attach the balance weight to the rear
of the tone arm.
If the cartridge weighs between 10 and 13 grams, attach the
included auxiliary weight to the main balance weight.
Balance weight
Putting the player together
In order to prevent damage during shipping some of the equipment
has been disassembled.
Put the player together in the following order.
•Do not connect the AC power supply cord until set up is complete.
•Leave the dust cover off until set up and adjustments are com-
plete.
1. Connect the PHONO earth lead and stereo PHONO
cables to the amplifier PHONO terminals.
White (L)
Stereo connection cable
Red (R)
•If the earth lead isn’t connected, a hum will be heard from the
AC power source.
•You will not have adequate volume or sound quality if connect-
ing to an amplifier that has no PHONO terminals.
2. Connect the AC power supply cord.
•Connect this cord only after all other connections are complete.
•Confirm the wattage of AC outlets on amplifiers and receivers
before using them for this unit. This unit consumes 13.5 W.
Locking nut
Head shell
1
2
3
Magnet
Screws
Turntable mat
Turntable
Tone arm
Center spindle
TUNER
SIGNAL GND
PHONO
(L) (R)
1
1
2
Amplifier
(not included)
This unit
To household
AC outlet
Earth lead
Stereo connection cable
Connections and installation
Connecting to an amplifier and AC power supply cord
Auxiliary weight
Also See for Technics SL-1200MK2
Related Manuals for Technics SL-1200MK2
-
Bose Audio SoundDock Series II system Owner's Manual
12 pages
-
Bose Audio SoundLink Mini Bluetooth speaker Owner's Manual
33 pages
-
Bose Audio SoundLink Bluetooth Mobile speaker II Owner's Manual
24 pages
-
Bose Audio Bose Solo TV Sound System Owner's Manual
23 pages
-
Bose Audio 301 Series V speakers Owner's Manual
10 pages
-
Bose Audio Wave music system III Owner's Manual
28 pages
-
Logitech Audio S-00078 Quick Start Manual
86 pages
-
Onkyo Audio HT-R530 Owner's Manual
71 pages
-
Pioneer Audio AVH-X2500BT Owner's Manual
212 pages
-
RCA Audio RT2770 Owner's Manual
2 pages
-
Alpine Audio CDE-143BT Owner's Manual
47 pages
-
Line 6 Audio Spider IV 75 Owner's Manual
33 pages
-
Behringer Audio Xenyx 802 Owner's Manual
12 pages
-
Behringer Audio Xenyx Q802USB Owner's Manual
12 pages
-
Behringer Audio Xenyx QX2442USB Owner's Manual
26 pages
-
Behringer Audio Xenyx X2222USB Owner's Manual
19 pages
-
Markbass Audio CMD 102P Owner's Manual
8 pages
-
Apple Audio iPod nano (7th generation) Owner's Manual
68 pages
-
Apple Audio iPod nano (5th generation) Owner's Manual
104 pages
-
Apple Audio iPod nano (4th generation) Owner's Manual
80 pages
-
Apple Audio iPod nano (3rd generation) Owner's Manual
72 pages
-
Apple Audio iPod nano (2nd generation) Owner's Manual
60 pages
-
Ford Audio 6000cd User's Manual
60 pages
-
QSC Audio USA 850 Owner's Manual
8 pages