Spyder Xtra User's Manual

Spyder Paintball User's Manual - Xtra.
Download
Page  of 2
4.2, 2063 votes
background image

 

 

 

 
 
TROUBLESHOOTING 
 
ONE OR MORE OF THE FOLLOWING MAY CAUSE RECOCKING RELATED PROBLEMS: 
 
a. The pressure in the tank is too low or too high.  
b. Need lubrication. (See OPERATION GUIDE in P4) 
c. #19A (striker o-ring) is damaged. Replace with new Kingman or Kingman-approved o-ring.  

 

  (Note: the #19A O-ring cannot be substituted by tank o-ring or a #9 o-ring). 
 d. Need to clean barrel and upper chamber of the receiver. 
e. Paintball may be defective. (i.e. expired, change shape) 
f. #9 (bolt o-ring) is damaged or the o-ring has expanded or swelled. Replace with a new o-ring. 
g. After ball breaks, remove all parts from UPPER chamber of receiver, wipe parts clean, and reassemble parts into receiver. Also 
make sure to clean barrel with squeegee. 
 
 
HELPFUL HINTS 
 
Always remove air tank before any disassembly of your marker. DO NOT remove #14 (valve body) unless specific valve body 
repairs are needed. If needed, remove valve body with a long, soft-tipped object such as the eraser end of a pencil. DO NOT 
remove the valve body with a screwdriver as it will damage the valve body and cause air leaks. (Note: #15 screw must be 
removed prior to taking out the valve body), 

0.657243s