Sony TDM-iP10 User's Manual

Sony Headphones User's Manual - TDM-iP10.
Download
Page  of 2
4.4, 1943 votes
background image

TDM-iP10 (M).GB.3-876-237-12(1)

TDM-iP10 (M)

© 2008 Sony Corporation 

Printed in China

Operating Instructions

3-876-237-12(1)

DIGITAL MEDIA

PORT Adapter

WARNING

DisposalofOldElectrical&Electronic

Equipment(ApplicableintheEuropean

UnionandotherEuropeancountries

withseparatecollectionsystems)

This symbol on the product or on its packaging 

indicates that this product shall not be treated as 

household waste. Instead it shall be handed over to 

the applicable collection point for the recycling of 

electrical and electronic equipment. By ensuring this 

product is disposed of correctly, you will help prevent 

potential negative consequences for the environment 

and human health, which could otherwise be caused 

by inappropriate waste handling of this product. The 

recycling of materials will help to conserve natural 

resources. For more detailed information about recycling 

of this product, please contact your local Civic Office, 

your household waste disposal service or the shop where 

you purchased the product.

Oncopyrights

 iPod is a trademark of Apple Inc., registered in the U.S. 

and other countries.

 All other trademarks and registered trademarks are of 

their respective holders. In this manual, ™ and ® marks 

are not specified.

List of parts locations

  DIGITAL MEDIA PORT cable

iPod connector

Power indicator: Lights up in green while the power 

is supplied.

To connect/disconnect the unit

To DMPORT jack

Connect the cable so that both  marks 

are aligned.

To remove the DIGITAL MEDIA PORT cable from the DMPORT jack, press 

both side buttons.

Connecting
Connect the DIGITAL MEDIA PORT cable of this unit 

to the DMPORT jack of an AV system. Make sure the 

AV system is turned off before connecting.

Turn on the AV system with a DMPORT jack 

connected to this unit, and select the DMPORT 

function.

Disconnecting

Before disconnecting, turn off the AV system.

To put the iPod into the unit’s connector
Choose the iPod Dock Adapter that fits your iPod. 
Insert the Dock Adapter into the unit.

Put the iPod into the unit’s connector.


Notes

 When placing or removing the iPod, handle the iPod in the same 

angle as that of the iPod connector on this unit and do not twist or 

sway the iPod to prevent connector damage.

 Do not carry the unit with an iPod set on the connector. Doing so 

may cause a malfunction.

 When placing or removing the iPod, brace the unit with one hand 

and take care not to press the controls of the iPod by mistake.

To use the unit as a battery charger

You can use the unit as a battery charger. While the 

POWER indicator lights up, the battery is charging. The 

charging status appears in the iPod display. For details, 

see the user’s guide of your iPod.

To remove the iPod Dock Adapter

To remove the iPod Dock Adapter, pull it up 

with your fingernail or a flat object using the 

slot inside the adapter.

Getting Started

0.512626s