Sony Sony XBA-4iP Earset XBA4IP User's Manual

Sony Headphones User's Manual - Sony XBA-4iP Earset XBA4IP.
Download
Page  of 2
4.3, 1846 votes
background image

English

Stereo headset

WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain 

or moisture.
To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to 

qualified personnel only.
You are cautioned that any changes or modifications not expressly approved in this 

manual could void your authority to operate this equipment.

Compatible iPod/iPhone models
You can use the unit with only the following models supporting remote control. Update 

your iPod, iPhone or iPad to the latest software before use. In the Operating Instructions, 

iPod, iPhone and iPad are collectively described as “iPod” except in special cases.

  iPod touch 4th generation

  iPod touch 3rd generation

  iPod touch 2nd generation

  iPod nano 6th generation

  iPod nano 5th generation (video camera)

  iPod nano 4th generation (video)

  iPod classic 120GB 160GB (2009)

  iPod shuffle 4th generation

  iPod shuffle 3rd generation

  iPhone 4

  iPhone 3GS

  iPad 2

  iPad

On copyright
iPhone®, iPod®, iPod classic®, iPod nano®, iPod shuffle®, and iPod touch® are trademarks 

of Apple Inc., registered in the U.S. and other countries. iPad® is a trademark of Apple 

Inc.

“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic 

accessory has been designed to connect specifical y to iPod, iPhone, or iPad, respectively, 

and has been certified by the developer to meet Apple performance standards. Apple is 

not responsible for the operation of this device or its compliance with safety and 

regulatory standards.

Features
  Earbuds with remote controller for iPod/iPhone/iPad 

Easy-to-use remote control (only for iPod, iPhone and iPad)

  Newly developed Quad Balanced Armature driver unit 

Newly developed micro-size driver unit (full-range + dual woofer + tweeter) 

reproduces fat bass sound and detailed high range for a rich and ambient full-range 

sound.

  Newly developed Double Layered Housing 

Magnesium inner housing holds the driver units rigidly for smooth sound response. 

Special ABS plastic outer housing prevents unwanted vibration for clear mid-high 

range.

  Noise-blocking design 

Noise-blocking design attenuates ambient noise and sound leakage.

  Housing design for wearing comfort 

Optimal y-placed, Quad Balanced Armature driver for ultimate wearing comfort.

How to use
Using the supplied cord adjuster (see fig. 
-)
You can adjust the cord length by winding the cord on the cord adjuster.

(The cord can be wound to the cord adjuster up to 50 cm. If you wind more, the cord 

comes off from the cord adjuster easily.)

1  Wind the cord.

2  Push cord into slot hole to secure in place.
Note

Do not wind the plug or split section of the cord, as it will strain the cord and may cause a wire break.

How to use the remote and microphone for an iPod (See fig. 

-)
You can control a connected iPod product.
Parts and controls

 Volume +

Increases the volume of the connected iPod product. 

 Center button

Plays/pauses a track of the connected iPod product with a single press. Skips to the next 

track with a double press. Skips to the previous track with a triple press. Starts the 

“VoiceOver*” feature with a long press (if available).

Press once to answer the cal . Press again to end.

Hold down for about two seconds to reject an incoming cal .

When you let go, two low beeps confirm the call was rejected.

 Volume –

Decreases the volume of the connected iPod product.

 Microphone
* Availability of the “VoiceOver” feature depends on iPod and its software version.

Wearing the headphones (see fig. )
1  Determine right and left headphone and hold them as in the illustration.

There is a tactile dot on the unit marked  to distinguish the left side.

2  Fit the headphones into your ears snugly, as in the illustration.

3  Adjust the headphone to fit snugly in your ear.
Installing the earbuds correctly (see fig. 
)
If the earbuds do not fit your ears correctly, low-bass sound may not be heard. To enjoy 

better sound quality, change the earbuds to another size or type, or adjust the earbuds 

position to sit on your ears comfortably and fit your ears snugly. If the earbuds do not fit 

your ears, try another size or type. Confirm the size of the earbuds by checking the color 

inside (see fig. - for hybrid silicone rubber earbuds and - for noise isolation 

earbuds).

When you change the earbuds, install them firmly on the headphones to prevent the 

earbud from detaching and remaining in your ear.
About hybrid silicone rubber earbuds (see fig. -)
Earbud sizes (inside color)

Small 

Large 

SS 

(Red)

(Orange)

(Green)

(Light blue)

To clean the hybrid silicone rubber earbuds

Remove the earbuds from the headphones, and wash them with a mild detergent 

solution.
About noise isolation earbuds (see fig. -)

Supplied noise isolation earbuds provides a snug fit for effective attenuation of ambient 

noise.
Earbud sizes (inside color)

Small 

Large 

(Orange)

(Green)

(Light blue)

Notes

 Prolonged use of the noise isolation earbuds may strain your ears due to their snug fit. If you have 

experience discomfort or pain in your ears, discontinue use.

 The pressure-relieving urethane cushion is extremely soft. Therefore, do not pinch or pull the 

urethane cushion. If the urethane cushion is broken or detached from the earbuds, it will not take its 

correct position and the earbuds will lose their noise isolation function.

 The pressure-relieving urethane cushion may deteriorate due to long-term storage or use. If the 

pressure-relieving power is lost and the urethane cushion becomes hard, the earbuds may lose their 

noise isolation function.

 Do not wash the noise isolation earbuds. Keep them dry, and avoid accumulation of water in the 

pressure-relieving urethane-cushions. Not doing so may cause early deterioration.

1

2

*

* There is a tactile dot beside 

Volume +.

1

Earbud

Tactile dot

2

3

Sectional View

Colored parts

Pressure-relieving 

urethane cushion

XBA-4iP

Stereo Headset
Operating Instructions
Manual de instrucciones

4-408-905-11(1)

©2011   Sony Corporation 

Printed in Thailand

To detach an earbud (see fig. -)

While holding the headphone, twist the parts inside of the earbud and pull the earbud 

off.
 Tip

If the earbud slips and cannot be detached, wrap it in a dry soft cloth.
To attach an earbud (see fig. -)

Push the parts inside of the earbud into the headphone until the projecting part of the 

headphone is ful y covered.

How to attach the clip to the cord (see fig. )
1  Hold the clip closed, and pull up the lever on the clip just a little.

2  Put the cord into the groove under the lever.
Notes

 If you pull up the lever on the clip without holding the clip closed, or holding the clip closed but 

opening the lever too much, you cannot put the cord into the groove under the lever.

 Do not catch the cord on the projection of the clip or do not wedge it into the groove. It may damage 

the wires of the cord. 

 Do not move the clip position with the cord attached. It may damage the wires of the cord. 

Removing the headphones

After use, remove the headphones slowly.
Note

Headphones are designed to fit closely in your ears. If the headphones are pressed hard while in use or 

taken off too quickly, they may cause injury.

Wearing headphones may produce a diaphragm click sound. This is not a malfunction.

Specifications
Headphones

Type:  

Closed, Quad Balanced Armature

Driver unit:  

Quad Balanced Armature

Power handling capacity:  

100 mW (IEC*)

Impedance:  

8 Ω at 1 kHz

Sensitivity:  

108 dB**

Frequency response:  

3 Hz – 28,000 Hz

Cord:  

1.2 m (47  1/4  in) (Y-type)

Plug:  

Four-conductor gold-plated L-shaped stereo mini 

plug for iPod with remote function

Mass:  

Approx. 8 g (0.28  oz) (without cord)

Microphone

Open circuit voltage level: 

– 42 dB (0 dB=1 V/Pa)

Supplied accessories

Hybrid silicone rubber earbuds: SS (red) (2), S (orange) (2), M (green) (attached to the 

unit at the factory) (2), L (light blue) (2)

Noise isolation earbuds: S (orange) (2), M (green) (2), L (light blue) (2)

Cord adjuster (winds cord up to 50 cm (19  3/4  in)) (1)

Clip (1)

Carrying case (1)

Operating Instructions (1)
*  IEC = International Electrotechnical Commission

** 150 mV input

Design and specifications are subject to change without notice.

Precautions
  Please keep your headphones clean at all times especial y inside the rubber earbud. 

(see fig. ) 

If any dust or ear wax is inside the earbud, you may experience some listening 

difficulties.

  Listening with headphones at high volume may affect your hearing. For traffic safety, 

do not use while driving or cycling.

  Handle the driver units careful y.

  Do not put weight or pressure on the headphones as it may cause the headphones to 

deform during long storage.

  The earbuds may deteriorate due to long-term storage or use.

  Install the earbuds firmly onto the headphones. If an earbud accidental y detaches and 

is left in your ear, it may cause injury.

  Store the earbuds where children cannot reach in order to prevent from accidental 

ingestion or choking.

  Do not leave the stereo headphones in a location subject to direct sunlight, heat or 

moisture.

  Be careful not to unintentional y press any buttons when you carry your iPod with this 

unit connected.

Note on static electricity

In particularly dry air conditions, mild tingling may be felt on your ears. This is a result 

of static electricity accumulated in the body, and not a malfunction of the headphones.

The effect can be minimized by wearing clothes made from natural materials.

Optional replacement earbuds can be ordered from your nearest authorized Sony 

retailer or www.sony.com.

0.580357s