Sony Sony QUALIA User's Manual

Sony Projectors User's Manual - Sony QUALIA.
Download
Page  of 2
4.3, 2089 votes
background image

Replacing the Lamp
If the screen becomes dark, the color looks unusual, or the LAMP
indicator on the front of the SXRD projection TV flashes, it is time
to replace the lamp with a new one (not supplied).

Use a Sony XL-5000 replacement lamp (not supplied) for replacement. Use of any
other lamp may damage the SXRD projection TV.
Wait until the cooling fan turns off (about two minutes) and then unplug the power
cord. (The cooling fan will continue to blow for about two minutes after turning the
power off.)
Allow the lamp to cool down completely before removing it. The surface of the lamp
remains extremely hot for at least 30 minutes after the power has been turned off.
Remove the dust inside the lamp slot with a vacuum cleaner, after pulling out the
lamp.

Put both hands underneath the Front Panel Cover and locate

the screw on each side of the cover.
Loosen the screws by turning them counterclockwise and
remove the cover.

Pull out the lamp.

Loosen the screw on the lamp cover with a coin or similar
object, slide the knob to the left. Put fingers on the right edge
of the cover and pull it forward to remove the cover.

Loosen the two screws that hold the lamp using the hex key
supplied with the lamp, and then pull out the lamp.

Attach the new lamp.

Making sure the front glass of the new lamp is facing the left
side of the lamp slot, place the lamp and tighten the screws.

Making sure the black pin on the back of the lamp cover goes
to the hole on the TV, put the lamp cover back on. Slide the
knob to the right until the v/V marks match, and then tighten
the screw.

Reattach the Front Panel Cover securely and tighten the two

screws underneath the cover.

Additional Connections
For best audio performance, connect your digital audio components
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you’ll need to connect the satellite antenna. If you
have an A/V receiver, you’ll need to connect speakers.

The connection diagrams shown in the reverse side are recommendations only; other
possible solutions may exist. Connections that include an A/V receiver can often be
very complex, so check your A/V receiver’s instruction manual for additional details.

Activating CableCARD™ Service
Before you can use CableCARD service,
you need to insert the CableCARD
(supplied by your cable provider) and
activate the service.

Inserting the CableCARD incorrectly may result in permanent damage to the card and
the TV.

Connector type

HDMI
(High-Definition
Multimedia Interface)

Component video

S VIDEO

Composite video

RF/Coaxial

Making Video Connections

Best Video
Performance

• See the “Cables Required” chart that appears with the diagram to

determine which cables you’ll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.

• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you’ll need a special bi-

directional splitter that’s compatible with your cable box. Contact
your cable provider for details.

For these components

See reverse side

Cable

Antenna

CableCARD

(optional)

 

VCR   

Player

DVD

Cable

Antenna

 

Cable Box

 

VCR   

Player

DVD

 

AV Receiver

      or

 

Satellite Receiver

Cable

Antenna

 

Cable Box

 

VCR   

Player

DVD

 

Satellite Receiver

Cable

Antenna

 

HD Cable Box

  

Player

DVD

 

AV Receiver

 

Digital Recorder

      or

 

HD Sat Receiver

Cable

Antenna

 

HD Cable Box

 

VCR   

Player

DVD

Cable

Antenna

 

Cable Box

 

VCR

 

Sony 

Dream System

      or

 

Satellite Receiver

• Review the following chart to determine which diagram to use to

connect the components in your system:

Quick Setup Guide

Sony Corporation © 2004   Printed in Japan

2-590-305-12(1)

1

Running Initial Setup

2

Programming the Remote Control

Along with your new SXRD projection TV, the packing box contains
a remote control, two AA (R6) batteries, cleaning cloth, etc. These
items are all you need to set up and use the TV.

Press POWER to turn on the TV.

The Initial Setup screen appears.

Press V/v to select the on-screen display language. Then press

.

The message “Start auto program now?” appears.

Auto Program may take more than 50 minutes to complete. A progress bar will
display the approximate progress of the Auto Program and Digital Channels/Add
sequences.

Press V/v to select “Yes”, then press  .

Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.

To run Auto Program again at a later time

Use the Auto Program feature as described in “Selecting Channel
Options” in the Owner’s Guide.

To add individual digital channels

Use the Digital Channel feature as described in “Selecting Channel
Options” in the Owner’s Guide.

The remote control is preset to operate Sony brand video equipment.

Sony Equipment

Programmable Code Number

DVD/VCR

751 (Sony DVD Player)

SAT/Cable

801 (Sony Satellite Receiver)

i.LINK

901 (Sony DVD Player (i.LINK))

If you have video equipment other than Sony brand that you want to
control with the SXRD projection TV’s remote control, use the
following procedures to program the remote control.

The equipment must have infrared (IR) remote capability in order to be used with this
remote control.

Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)

Manufacturer’s codes

DVD Players

Manufacturer

Code

Sony

751

Sony (i.LINK)

901

General Electric

755

Hitachi

758

JVC

756

Magnavox

757

Mitsubishi

761

Oritron

759

Panasonic

753

Philips

757

Pioneer

752

RCA/PROSCAN

755

Samsung

758

Toshiba

754

Zenith

760

Laserdisc Players

Manufacturer

Code

Sony

701

Panasonic

704, 710

Pioneer

702

VCRs

Manufacturer

Code

Sony

301, 302, 303

Admiral (M. Ward)

327

Aiwa*

338, 344

Audio Dynamic

314, 337

Broksonic

319, 317

Canon

309, 308

Citizen

332

Craig

302, 332

Criterion

315

Curtis Mathes

304, 338, 309

Daewoo

341, 312, 309

DBX

314, 336, 337

Dimensia

304

Emerson

319, 320, 316, 317,
318, 341

Manufacturer

Code

Fisher

330, 335

Funai

338

General Electric

329, 304, 309

Go Video

322, 339, 340

Goldstar

332

Hitachi

306, 304, 305, 338

Instant Replay

309, 308

JC Penney

309, 305, 304, 330,
314, 336, 337

JVC

314, 336, 337, 345,
346, 347

Kenwood

314, 336, 332, 337

LG

332

LXI (SEARS)

332, 305, 330, 335,
338

Magnavox

308, 309, 310

Marantz

314, 336, 337

Marta

332

Memorex

309, 335

Minolta

305, 304

Mitsubishi/MGA

323, 324, 325, 326

Multitech

325, 338, 321

NEC

314, 336, 337

Olympic

309, 308

Optimus

327

Orion

317

Panasonic

308, 309, 306, 307

Pentax

305, 304

Philco

308, 309

Philips

308, 309, 310

Pioneer

308

Quasar

308, 309, 306

RCA/PROSCAN

304, 305, 308, 309,
311, 312, 313, 310,
329

Realistic

309, 330, 328, 335,
324, 338

Sansui

314

Samsung

322, 313, 321

Sanyo

330, 335

Scott

312, 313, 321, 335,
323, 324, 325, 326

Sharp

327, 328

Signature 2000 (M.Ward) 338, 327

SV 2000

338

Press FUNCTION repeatedly until the DVD/VCR,

SAT/CABLE or i.LINK indicator lights up.

Press SAT/CABLE for five seconds until the

indicator of the selected input flashes.

While the desired indicator is flashing, enter the

three-digit manufacturer’s code number.

Press ENTER.

To check if the code number works, aim the SXRD

projection TV’s remote control at the equipment
and press SAT/CABLE that corresponds with that
equipment. If it responds, you are done. If not, try
using another code listed for that manufacturer.

2
5

1

3

4

If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our QUALIA Call Center at 1-877-782-5423 for US residents or
Customer Relations Center 1-877-899-SONY (7669) for Canadian residents.

A

B

C

D

E

F

Checking the
Supplied Accessories

Connecting Your TV

Your TV includes
several types of video
inputs. Use the inputs
that are available on
your components that
provide the best video
performance, as
described in right.

AUDIO IN

R

6

4

3

1

L

HD/D

(1080i/720

VIDEO IN

S VIDEO

VIDEO

AUDIO

L

(MONO)

R

VHF/UHF

CABLE

i.LINK

TS/DV/MICROMV/HDV

PCM/DOLBY DIGITAL

OUT

DIGITAL
AUDIO
(OPTICAL)

is400

CableCARD

3

4

Manufacturer

Code

Sylvania

308, 309, 338, 310

Symphonic

338

Tashiro

332

Tatung

314, 336, 337

Teac

314, 336, 338, 337

Technics

309, 308

Toshiba

312, 311

Wards

327, 328, 335, 331,
332

Yamaha

314, 330, 336, 337

Zenith

331

Cable Boxes

Manufacturer

Code

Sony

230

Hamlin/Regal

222, 223, 224, 225,
226

Jerrold/G.I./Motorola 201, 202, 203, 204,

205, 206, 207, 208,
218

Oak

227, 228, 229

Panasonic

219, 220, 221

Pioneer

214, 215

Scientific Atlanta

209, 210, 211

Tocom

216, 217

Zenith

212, 213

Satellite Receivers

Manufacturer

Code

Sony

801

Dish Network

810

Echostar

810

General Electric

802

Hitachi

805

Hughes

804

Mitsubishi

809

Panasonic

803

RCA/PROSCAN

802, 808

Toshiba

806, 807

* If an Aiwa VCR does not

work even though you enter
the code for Aiwa, enter the
code for Sony instead.

If more than one code number is listed, try entering them one by one until you come to
the correct code for your equipment.
If you enter a new code number, the code number you previously entered at that setting
is erased.
In some cases, you may not be able to operate your equipment with the supplied
remote control. In such cases, use the equipment’s own remote control unit.

POWER

STD/DUO

POWER

STD/DUO

0.618172s