Sony Sony Digital Flash Voice Recorder ICD-PX333F User's Manual

Sony Microcassette Recorder User's Manual - Sony Digital Flash Voice Recorder ICD-PX333F.
Download
Page  of 2
4.7, 2345 votes
background image

IC Recorder
Quick Start Guide

4-441-194-

51(1)

© 2013 Sony Corporation  Printed in China

ICD-PX333/PX333F

 

ˎ IC Recorder (1)

 

ˎ Stereo headphones (1)*

 

ˎ USB connecting cable (1)

 

ˎ Stereo Microphone with 

Shirt‑Clip (1)*

 

ˎ Carrying pouch (1)*

 

ˎ LR03 (size AAA) alkaline 

batteries (2)

 

ˎ Application Software, Dragon 

NaturallySpeaking (DVD‑ROM) 
(1)*

 

ˎ Quick Start Guide (1)

 

ˎ Application Software, Sound 

Organizer (Installer file stored in 
the built‑in memory so that you 
can install it to your computer.)

 

ˎ Help Guide (HTML file stored 

in the built‑in memory so it 
can easily be copied to your 
computer.)

*  supplied with some models in 

some regions.

Check the supplied items.

 

ˎ Electret condenser microphone 

ECM‑CS10, ECM‑CZ10, 
ECM‑DS70P, ECM‑DS30P, 
ECM‑CS3, ECM‑TL3

 

ˎ Rechargeable battery 

NH‑AAA‑B2EN, NH‑AAA‑B2KN

 

ˎ USB AC adaptor AC‑UD20, 

AC‑U501AD, AC‑U50AG

 

ˎ Compact charger & 

2‑pc AAA Multi‑Use Premium 
batteries BCG‑34HS2KAN, 
BCG‑34HW2KAN

Optional accessories

Welcome to your new Sony IC recorder!
This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder.
Please read it carefully. We hope you enjoy using your new Sony IC recorder.

Parts and controls

Built‑in microphone
 (microphone) jack*
Display window
DISP/MENU button
SCENE button
  (folder) button
 PLAY/STOP•ENTER* button
 (stop) button
– (review/fast backward), + (cue/fast 

forward) buttons

Speaker
 (headphones) jack
Operation indicator
ERASE button
VOL –/+ (volume –/+) button*
  A‑B (repeat A‑B) button
REC/PAUSE (record/pause) button
NOISE CUT switch
T‑MARK (track mark) button

  (USB) connector
M2™/microSD memory card slot
HOLD•POWER ON/OFF switch
Battery compartment
Strap hole (A strap is not supplied.)

* These buttons and the jack have a tactile dot. Use it as a reference point for operations, or to identify each terminal.

Let’s try out your new IC recorder

Utilizing Your Computer

Installing the help guide on your computer
By installing the help guide on your computer from the built‑in memory of the IC recorder, you can 
search for detailed operations and  possible solutions when a problem occurs. 

  Connect the   (USB) connector of the IC recorder with the USB port of your running 

computer with the supplied USB connecting cable inserted into the connectors securely 
until each plug stops to the end.

  In Windows: Click [Computer] (or [My Computer]), then double-click [IC RECORDER]  

[FOR WINDOWS]. 
In Mac: Double-click [IC RECORDER] on the desktop.

  Install the help guide.

In Windows: Double‑click [Help_Guide_Installer] (or [Help_Guide_Installer.exe]).
In Mac: Double‑click [Help_Guide_Installer_for_mac.app]. (v10.5.8 or higher)
Follow the instructions that appear on the screen to proceed with installation.

  After the installation completes, double-click the [Help_Guide_icdp33_uc.htm] (for 

the customers in the U.S.A. and the Latin American countries] or [Help_Guide_icdp33_
zz.htm] (for customers in other countries) icon in the desktop for Windows (or in Finder 
for Mac). 
The help guide is displayed.
You can also view the help guide on the following Sony IC Recorder customer support home 
page:
For customers in the U.S.A. and the Latin American countries: http://rd1.sony.net/help/icd/p33/
uc/
For customers in other countries: http://rd1.sony.net/help/icd/p33/zz/

Copying files from the IC recorder to your 

computer
You can copy the files and folders from the IC recorder to your computer to store them.

  Connect the IC recorder to your computer.
  Copy files or folders you want to transfer to your computer.

Drag and drop the files or folders you want to copy from “IC RECORDER” or “MEMORY CARD” to 
the local disk on your computer.

To copy a file or folder (Drag and drop)

IC RECORDER or 
MEMORY CARD

Your computer 

 Click and hold,

 drag,

 and then drop.

  Disconnect the IC recorder from your computer.

Installing Sound Organizer
Install Sound Organizer on your computer.
Note
Sound Organizer is compatible with the Windows PC only. It is not  compatible with Mac.

 

¼ When installing Sound Organizer, log in to an account with administrator privileges.

  Connect the   (USB) connector of the IC recorder with the USB port of your running 

computer with the supplied USB connecting cable inserted into the connectors securely 
until each plug stops to the end.

 

  Make sure the IC recorder has been recognized properly.

While the IC recorder is connected to the computer, “Connecting” is displayed in the display 
window of the IC recorder.

  Go to the [Start] menu, click [Computer] (or [My Computer]), and then double-click [IC 

RECORDER] 

 [FOR WINDOWS].

  Double-click [SoundOrganizerInstaller_V140] (or [SoundOrganizerInstaller_V140.exe]).

Follow the instructions that appear on the screen.

  Make sure that you accept the terms of the license agreement, select [I accept the terms 

in the license agreement], and then click [Next].

  When the [Setup Type] window appears, select [Standard] or [Custom], and then click 

[Next].
Follow the instructions on the screen and set the installation settings when you select [Custom].

  When the [Ready to Install the Program] window appears, click [Install].

The installation starts.

  When the [Sound Organizer has been installed successfully.] window appears, check 

[Launch Sound Organizer Now], and then click [Finish].
Note
You may need to restart your computer after installing Sound Organizer.

Note
If you format the built‑in memory, all data stored there will be erased. (The Help Guide and the Sound Organizer 
software will also be erased.)

On power
Operate the IC recorder on 3.0 V or 2.4 V.
Use two LR03 (size AAA) alkaline batteries or NH‑AAA 
rechargeable batteries.

On safety
Do not operate the IC recorder while driving, cycling 
or operating any motorized vehicle.

On handling

 

ˎ Do not leave the IC recorder in a location near heat 

sources, or in a place subject to direct sunlight, 
excessive dust or mechanical shock.

 

ˎ Should any solid object or liquid fall into the IC 

recorder, remove the battery and have the IC 
recorder checked by qualified personnel before 
operating it any further.

If you have any questions or problems concerning 
your IC recorder, please consult your nearest Sony 
dealer.

Precautions

Owner’s Record
The model number is located at the rear panel and the serial number is located inside the battery compartment. 
Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer 
regarding this product.
Model No.  ________________________________
Serial No.  _________________________________

WARNING
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a 
long time.

CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

Capacity (User available capacity*1*2)
4 GB (approx. 3.60 GB = 3,865,470,566 Byte)

*1  A small amount of the built‑in memory is used for file management and therefore not available for user storage.
*2  When the built‑in memory is formatted with the IC recorder.

Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*3
Approx. 37.5 mm × 114.0 mm × 20.9 mm

Mass (JEITA)*3
Approx. 74 g including two LR03 alkaline batteries

*3  Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association)

The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions 
may not comply with FCC technical regulations.

INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following measures: 
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to 
operate this equipment.

If you have any questions about this product, you may call: Sony Customer Information Service Center 1‑800‑222‑7669 
or http://www.sony.com/

Declaration of Conformity
Trade Name 

:  SONY

Model 

: ICD‑PX333

Responsible Party :  Sony Electronics Inc.
Address 

:  16530 Via Esprillo, San Diego, CA 92127 USA

Telephone Number  :  858‑942‑2230
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

1. Power on.

  Slide and lift the battery compartment lid, then insert 

batteries with the correct polarity.

  Turn the power on.

Slide and hold the HOLD•POWER ON/OFF switch in the 
direction of “POWER ON/OFF” for more than 1 second.

To turn the power off, slide and hold the HOLD•POWER ON/OFF 
switch in the direction of “POWER ON/OFF” until “Power Off” is 
displayed.

To prevent unintentional operations (HOLD)

 

¼ To release the IC recorder from the HOLD status, slide the 

HOLD•POWER ON/OFF switch towards the center.

2. Set the date and time.

When you insert a battery for the first time, or after the IC 
recorder has been without a battery for more than 1 minute, “Set 
Date&Time” appears, and then the clock setting window appears.

  Press – or + to set the year (the last two digits of 

the year), and then press 

 PLAY/STOP•ENTER. Repeat 

this procedure to set month, day, hour, and minute in 
sequence.
When you set the minute and press 

 PLAY/STOP•ENTER, 

the clock reflects the setting.

Note
The time is displayed either in 12‑Hour with “AM”or “PM,”or in 
24‑Hour,depending on the “Time Display”setting in the menu. The 
default setting differs depending on the country or region you 
purchased the IC recorder.

3. Select the menu language.

  Press DISP/MENU.
  Press – or + to select “Detail Menu”, and then 

press 

 PLAY/STOP•ENTER.

  Press – or + to select “Language,” and then press 

 PLAY/STOP•ENTER.

  Press – or + to select the language that you want 

to use in the display window, and then press 

 PLAY/

STOP•ENTER.
You can select the following languages: 
Deutsch (German), English, Español (Spanish), Français 
(French), Italiano (Italian), Русский (Russian), 

 (Korean), 

 (Chinese), 

 (Chinese), 

 (Thai)

 

¼ Number of language options you can select and the default setting 

differ depending on the country or region you purchased your IC 
recorder.

 Press  (stop) to return to the stop mode display.

4. Record.

 

¼ Before you start using the IC recorder, make sure that you slide the 

HOLD•POWER ON/OFF switch towards the center to release the 
HOLD status.

 Press REC/PAUSE.

Recording starts and the operation indicator (

‑A) flashes in 

orange, and then lights in red.

 

¼ You can pause recording by pressing REC/PAUSE. Press REC/

PAUSE again to restart recording.

  Place the IC recorder so that the built-in microphone face 

the direction of the source to be recorded.

 Press  (stop) to stop recording.

The “Accessing...” animation appears and the recording stops.

5. Listen.

 Press  PLAY/STOP•ENTER.

Playback starts and the operation indicator (

‑A) lights in 

green.

  Adjust the volume by pressing VOL –/+.
 Press  (stop) to stop playback.

6. Erase.

Once a file is erased, you cannot restore it.
  Press ERASE.

“Erase?” is displayed and the file to be erased is played back 
for confirmation.

  Select “YES” using – or +, and then press  

PLAY/STOP•ENTER.
The “Erasing...” animation appears and the selected file is 
erased.

Additional features
Details of these additional features for recording, playback, and editing are included in the help guide.

 

ˎ Scene Selection

 

ˎ Noise Cut

 

ˎ T‑MARK (Track mark)

 

ˎ DPC (Digital Pitch Control)

 

ˎ A‑B Repeat

 

ˎ VOR (Voice Operated Recording)

 

ˎ Alarm

 

ˎ Easy Search

 

ˎ Divide

 

ˎ Sound Organizer editing software

Note
Depending on the country or region, some of the models or optional accessories are not available.

GB

ES

Related Manuals for Sony Sony Digital Flash Voice Recorder ICD-PX333F

0.598476s