Sony Sony CDX-SW200 User's Manual

Sony CD Player User's Manual - Sony CDX-SW200.
Download
Page  of 4
4.8, 2121 votes
background image

AUDIO OUT REAR

© 2004 Sony Corporation   Printed in Korea  

3-261-841-61

 (1)

Cautions
• This unit is designed for negative ground 12 V DC

operation only.

• Do not get the leads under a screw, or caught in

moving parts (e.g. seat railing).

• Before making connections, turn the car ignition

off to avoid short circuits.

• Connect the yellow and red power input leads

only after all other leads have been connected.

• Run all ground leads to a common ground

point.

• Be sure to insulate any loose unconnected leads

with electrical tape for safety.

• The use of optical instruments with this product

will increase eye hazard.

Notes on the power supply lead (yellow)
• When connecting this unit in combination with

other stereo components, the connected car
circuit’s rating must be higher than the sum of
each component’s fuse.

• When no car circuits are rated high enough,

connect the unit directly to the battery.

Parts Iist (1)
• The numbers in the list are keyed to those in the

instructions.

• The bracket 1 and the protection collar 3 are

attached to the unit before shipping. Before
mounting the unit, use the release keys 5 to
remove the bracket 1 and the protection collar 3
from the unit. For details, see “Removing the
protection collar and the bracket (4)” on the
reverse side of the sheet.

• Keep the release keys 5 for future use as they

are also necessary if you remove the unit from
your car.

Caution
Handle the bracket 1 carefully to avoid injuring
your fingers.

Note
Before installing, make sure that the catches on
both sides of the bracket 
1 are bent inwards 2 mm
(3/32 in).
If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.

Installation/Connections

Instalación/Conexiones

FM/AM
Compact Disc
Player

Connection example (2)
Notes 
(2-B)
• Be sure to connect the ground lead before

connecting the amplifier.

• If you connect an optional power amplifier and

do not use the built-in amplifier, the beep
sound will be deactivated.

Connection diagram (3)
To a metal surface of the car

First connect the black ground lead, then
connect the yellow and red power input leads.

To the power antenna control lead or power

supply lead of antenna booster amplifier
Notes
• It is not necessary to connect this lead if

there is no power antenna or antenna
booster, or with a manually-operated
telescopic antenna.

• When your car has a built-in FM/AM antenna

in the rear/side glass, see “Notes on the
control and power supply leads.”

To AMP REMOTE IN of an optional power

amplifier
This connection is only for amplifiers.
Connecting any other system may damage the
unit.

To the +12 V power terminal which is

energized in the accessory position of the
ignition key switch
Notes
• If there is no accessory position, connect to

the +12 V power (battery) terminal which is
energized at all times.
Be sure to connect the black ground lead to
a metal surface of the car first.

• When your car has a built-in FM/AM antenna

in the rear/side glass, see “Notes on the
control and power supply leads.”

To the +12 V power terminal which is

energized at all times
Be sure to connect the black ground lead to a
metal surface of the car first.

A

B

1

4

5

Equipment used in illustrations (not supplied)
Equipo utilizado en las ilustraciones (no suministrado)

Rear speaker
Altavoces traseros

Front speaker
Altavoces delanteros

1

Power amplifier
Amplificador de potencia

× 4

2

× 2

3

CDX-SW200

1

Catch

2

0.544952s