Sony SAVS350H User's Manual

Sony Speakers User's Manual - SAVS350H.
Download
Page  of 2
4.7, 2214 votes
background image

4-147-992-11(4)

SA-VS350H

SA-VS150H

Home Theatre 

Speaker System

©2009 Sony Corporation   Printed in China

(4)

English

Owner’s Record
The model and serial numbers are located on the rear of 

the unit.  Record the serial number in the space provided 

below.  Refer to them whenever you call upon your Sony 

dealer regarding this product.

Model No. SA-VS350H/SA-VS150H

Serial No. 

WARNING

To reduce the risk of fire or electric shock, do not expose 

this apparatus to rain or moisture.

To reduce the risk of fire, do not cover the ventilation opening of 

the apparatus with newspapers, tablecloths, curtains, etc. Do not 

place the naked flame sources such as lighted candles on the 

apparatus.

To reduce the risk of fire or electric shock, do not expose this 

apparatus to dripping or splashing, and do not place objects 

filled with liquids, such as vases, on the apparatus.

To prevent injury, this apparatus must be securely attached to 

the floor/wall in accordance with the instal ation instructions.

The unit is not disconnected from the mains as long as it is 

connected to the AC outlet, even if the unit itself has been 

turned off.

As the main plug is used to disconnect the unit from the mains, 

connect the unit to an easily accessible AC outlet. Should you 

notice an abnormality in the unit, disconnect the main plug 

from the AC outlet immediately.

To reduce the risk of electric shock, the speaker cord should be 

connected to the apparatus and the speakers in accordance with 

the following instructions.

1. Disconnect the AC power cord (mains lead) from the wall 

outlet (mains). 

2. Strip 10 to 15 mm (13

/32 ~ 19/32 in.) of the wire insulation of the 

speaker cord .

3. Connect the speaker cord to the apparatus and the speakers 

careful y so as not to touch the core of speaker cord by hand. 

Also disconnect the AC power cord (mains lead) from the wall 

outlet (mains) before disconnecting the speaker cord from the 

apparatus and the speakers.

Do not install the appliance in a confined space, such as a 

bookcase or built-in cabinet.

The nameplate is located on the rear exterior.

Disposal of Old Electrical & 

Electronic Equipment (Applicable 

in the European Union and other 

European countries with separate 

collection systems)
This symbol on the product or on its 

packaging indicates that this product shall not 

be treated as household waste. Instead it shall be handed over to 

the applicable collection point for the recycling of electrical and 

electronic equipment. By ensuring this product is disposed of 

correctly, you will help prevent potential negative consequences 

for the environment and human health, which could otherwise 

be caused by inappropriate waste handling of this product. The 

recycling of materials will help to conserve natural resources. 

For more detailed information about recycling of this product, 

please contact your local Civic Office, your household waste 

disposal service or the shop where you purchased the product.

Notice for customers: the following information 

is only applicable to equipment sold in 

countries applying EU directives.
The manufacturer of this product is Sony Corporation, 1-7-1 

Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized 

Representative for EMC and product safety is Sony Deutschland 

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For 

any service or guarantee matters please refer to the addresses 

given in separate service or guarantee documents.
NOTICE FOR THE CUSTOMERS IN THE U.S.A

This symbol is intended to alert the user to the 

presence of uninsulated “dangerous voltage” within 

the product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock to 

persons.
This symbol is intended to alert the user to the 

presence of important operating and maintenance 

(servicing) instructions in the literature 

accompanying the appliance.

Important Safety Instructions
1)   Read these instructions.

2)   Keep these instructions.

3)   Heed all warnings.

4)   Follow all instructions.

5)   Do not use this apparatus near water.

6)   Clean only with dry cloth.

7)   Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8)   Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 

that produce heat.

9)   Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades with 

one wider than the other. A grounding type plug has two 

blades and a third grounding prong. The wide blade or the 

third prong are provided for your safety. If the provided plug 

does not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

10)  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus.

11)  Only use attachments/accessories specified by the 

manufacturer.

12)  Use only with the cart, stand, tripod, bracket, or table 

specified by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13)  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14)  Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, 

such as power-supply cord or plug is damaged, liquid has 

been spilled or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, does not 

operate normal y, or has been dropped.

Precautions
On safety
 Before operating the system, be sure that the operating voltage 

of the system is identical with that of your local power supply.

 Unplug the system from the wall outlet if it is not to be used 

for an extended period of time. To disconnect the cord, pull 

the cord by grasping the plug. Never pull the cord itself.

 Should any liquid or solid object fall into the system, unplug 

the system’s power cord and have the system checked by 

qualified personnel before operating it any further.

 AC power cord must be changed only at the qualified service 

shop.

On operation
 Do not drive the speaker system with a continuous wattage 

exceeding the maximum input power of the system.

 If the polarity of the speaker connections are not correct, the 

bass tones will be weak and the position of the various 

instruments obscure.

 Before connecting, turn off the amplifier to avoid damaging 

the speaker system.

 The speaker grille cannot be removed. Do not attempt to 

remove the grille on the speaker system. If you try to remove 

it, you may damage the speaker.

 The volume level should not be turned up to the point of 

distortion.

On placement
 Do not set the speakers in an inclined position.
 Do not place the speakers in locations that are:

— Extremely hot or cold

— Dusty or dirty

— Very humid

— Subject to vibrations

— Subject to direct sunlight
 Use caution when placing the speaker on a special y treated 

(waxed, oiled, polished, etc.) floor, as staining or discoloration 

may result.

On cleaning
Clean the speaker cabinets with a soft cloth lightly moistened 

with a mild detergent solution or water. Do not use any type of 

abrasive pad, scouring powder or solvent such as alcohol or 

benzine.

Specifications
AUDIO POWER SPECIFICATIONS  

(For the U.S. model)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

with 6 ohm loads both channels driven, at 100 Hz; rated 150 

watts per channel minimum RMS power, with no more than 

10% total harmonic distortion from 250 milliwatts to rated 

output.
SS-FVS350 (front speakers for SA-VS350H)
Speaker system 

2 way

Speaker units 

Woofer: 60  100 mm (2 3/8  

4 in.), cone type  

Tweeter: 25 mm (1 in.), balanced 

dome type

Enclosure type 

Bass reflex

Rated impedance 

8 ohms

Power handling capacity

Maximum input power:  150 W

Sensitivity level 

81 dB (1 W, 1 m)

Frequency range 

120 Hz - 50,000 Hz

Dimensions (w/h/d) 

Approx. 82  1060  100 mm  

(3 1/4  41 3/4  4 in.), including 

front grille, (Diameter of base: 

250 mm (9 7/8 in.))

Mass 

Approx. 5.0 kg (11 lb)

SS-CNV350 (center speaker) 
Speaker system 

2 way

Speaker units 

Woofer: 57 mm (2 1/4 in.) ( 2), 

cone type 

Tweeter: 25 mm (1 in.), balanced 

dome type

Enclosure type 

Bass reflex

Rated impedance 

8 ohms

Power handling capacity

Maximum input power:  150 W

Sensitivity level 

81 dB (1 W, 1 m)

Frequency range 

120 Hz - 50,000 Hz

Dimensions (w/h/d) 

Approx. 345  86  98 mm  

(13 5/8  3 1/2  3 7/8 in.), 

including front grille

Mass 

Approx. 1.7 kg (3 lb 12 oz)

SS-SRV350 
(surround speakers for SA-VS350H)  
(front and surround speakers for SA-VS150H)
Speaker system 

2 way

Speaker units 

Woofer: 60  100 mm (2 3/8  

4 in.), cone type 

Tweeter: 25 mm (1 in.), balanced 

dome type

Enclosure type 

Bass reflex

Rated impedance 

8 ohms

Power handling capacity

Maximum input power:  150 W

Sensitivity level 

81 dB (1 W, 1 m)

Frequency range 

120 Hz - 50,000 Hz

Dimensions (w/h/d) 

Approx. 82  184  98 mm  

(3 1/4  7 1/4  3 7/8 in.), including 

front grille

Mass 

Approx. 1.0 kg (2 lb 4 oz)

SA-WVS350 (subwoofer)
Speaker system 

Active subwoofer

Speaker units 

Woofer: 150 mm (6 in.) ( 2), 

cone type

Enclosure type 

Acoustical y Loaded Bass reflex

Reproduction frequency range 

28 Hz - 200 Hz

Continuous RMS power output  

150 W (6 ohms 100 Hz, 10% 

THD)

Input
LINE IN (input pin jack)
General
Power requirements

  North American models: 120 V AC, 60 Hz

  Other models: 

220-230 V AC, 50/60 Hz

Power consumption

  North American models: 100 W/less than 0.9 W (standby 

mode)

  Other models: 

90 W/less than 0.9 W (standby 

mode)

Dimensions (w/h/d) 

Approx. 197  410  505 mm  

(7 7/8  16 1/4  20 in.), 

including front grille

Mass 

Approx. 13 kg (28 lb 10 oz)

Supplied accessories
Audio connecting cord (1)*

Speaker connecting cords (4)*

Speaker connecting cords (3)*

Brackets (2)

Speaker stands (for surround/surround back speakers) (2)

Screws (6)

* Except for North American models.

Design and specifications are subject to change without notice.

Français

AVERTISSEMENT

Pour réduire les risques d’incendie ou d’électrocution, 

gardez cet appareil à l’abri de la pluie et de l’humidité.

Pour réduire le risque d’incendie, n’obstruez pas l’orifice de 

ventilation de l’appareil avec un journal, une nappe, une tenture, 

etc. Ne posez pas non plus de source de flamme nue, notamment 

une bougie al umée, sur l’appareil.

Pour réduire les risques d’incendie ou d’électrocution, gardez cet 

appareil à l’abri des éclaboussures ou des gouttes d’eau, et ne 

placez pas d’objets remplis de liquides, comme des vases, sur 

l’appareil.

Pour éviter toute blessure, cet appareil doit être solidement fixé 

au sol/mur conformément aux instructions d’instal ation.

L’appareil n’est pas débranché du secteur aussi longtemps qu’il est 

raccordé à la prise secteur, même s’il s’éteint automatiquement.

Comme la fiche principale permet de débrancher l’appareil du 

secteur, raccordez l’appareil à une prise secteur facilement 

accessible. Si vous constatez une anomalie dans l’appareil, 

débranchez immédiatement la fiche principale de la prise 

secteur.

N’installez pas l’appareil dans un espace confiné comme 

dans une bibliothèque ou un meuble encastré.

La plaque signalétique se trouve à l’extérieur, au dos de l’appareil.

Précautions
Sécurité
 Avant de mettre le système en service, assurez-vous que sa 

tension de fonctionnement est identique à celle de 

l’alimentation secteur locale.

 Débranchez le système s’il ne doit pas être utilisé pendant 

longtemps. Pour débrancher le cordon, tirez sur la fiche. Ne 

tirez jamais sur le cordon proprement dit.

 Si un liquide ou un solide pénètre dans le système, débranchez 

le cordon d’alimentation du système et faites vérifier le 

système par un professionnel avant de l’utiliser à nouveau.

 Le cordon d’alimentation secteur doit être remplacé seulement 

dans un centre de service compétent.

Fonctionnement
 Ne pas faire fonctionner le système acoustique 

continuellement à une puissance dépassant sa puissance 

d’entrée maximale.

 Si la polarité des connexions d’enceintes n’est pas correcte, les 

graves seront faibles et la position des différents instruments 

de musique indistincte.

 Avant de raccorder les enceintes, éteignez l’amplificateur pour 

éviter d’endommager le système acoustique.

 Les grilles des enceintes ne peuvent pas être retirées. N’essayez 

pas de les enlever car les enceintes pourraient être 

endommagées.

 Le volume sonore ne doit pas être élevé au point que le son en 

soit déformé.

Emplacement
 N’installez pas les enceintes en position inclinée.
 N’installez pas les enceintes dans des endroits :

— Extrêmement chauds ou froids

— Poussiéreux ou sales

— Très humides

— Sujets à des vibrations

— Exposés à la lumière directe du soleil
 Prenez les précautions nécessaires lors de l’instal ation des 

enceintes sur un plancher traité (ciré, huilé, verni, etc.) pour 

éviter l’apparition de taches ou la décoloration du sol.

Nettoyage
Nettoyez les coffrets d’enceintes avec un chiffon doux légèrement 

imprégné d’une solution détergente neutre ou d’eau. Ne pas 

utiliser de tampons abrasifs, de poudre à récurer ni de solvants, 

comme l’alcool ou l’essence.

Spécifications
SS-FVS350  
(enceintes frontales pour le modèle SA-VS350H)
Système acoustique 

2 voies

Enceintes 

Haut-parleur : 60  100 mm 

(2 3/8  4 po.), à cône  

Aigu : 25 mm (1 po.), type en 

dôme équilibré

Type de caisson 

Bass-reflex

Impédance nominale 

8 ohms

Tenue en puissance 

Capacité maximale :  

150 W

Niveau de sensibilité 

81 dB (1 W, 1 m)

Plage de fréquences 

120 Hz - 50 000 Hz

Dimensions (l/h/p) 

environ 82  1 060  100 mm  

(3 1/4  41 3/4  4 po.),  

avec grille avant, (Diamètre de la 

base : 250 mm (9 7/8 po.))

Poids 

environ 5,0 kg (11 li.)

SS-CNV350 (enceinte centrale) 
Système acoustique 

2 voies

Enceintes 

Haut-parleur : 57 mm (2 1/4 po.) 

( 2), à cône  

Aigu : 25 mm (1 po.), type en 

dôme équilibré

Type de caisson 

Bass-reflex

Impédance nominale 

8 ohms

Tenue en puissance

Capacité maximale : 

150 W

Niveau de sensibilité 

81 dB (1 W, 1 m)

Plage de fréquences 

120 Hz - 50 000 Hz

Dimensions (l/h/p) 

environ 345  86  98 mm  

(13 5/8  3 1/2  3 7/8 po.), 

avec grille avant

Poids 

environ 1,7 kg (3 li. 12 on.)

SS-SRV350 
(enceintes surround pour le modèle SA-VS350H)  
(enceintes frontales et surround pour le modèle SA-
VS150H)
Système acoustique 

2 voies

Enceintes 

Haut-parleur : 60  100 mm 

(2 3/8  4 po.), à cône  

Aigu : 25 mm (1 po.), type en 

dôme équilibré

Type de caisson 

Bass-reflex

Impédance nominale 

8 ohms

Tenue en puissance

Capacité maximale : 

150 W

Niveau de sensibilité 

81 dB (1 W, 1 m)

Plage de fréquences 

120 Hz - 50 000 Hz

Dimensions (l/h/p) 

environ 82  184  98 mm  

(3 1/4  7 1/4  3 7/8 po.),  

avec grille avant

Poids 

environ 1,0 kg (2 li. 4 on.)

SA-WVS350 (caisson de graves)
Système acoustique 

Caisson de graves actif

Enceintes 

Haut-parleur : 150 mm (6 po.) 

( 2), type cônique

Type de caisson 

Bass-Reflex acoustiquement 

chargé

Plage de fréquences reproduites 

28 Hz - 200 Hz

Puissance de sortie RMS continue  

150 W (6 ohms 100 Hz, 10% DHT)

Entrée
LINE IN (prise d’entrée)
Généralités
Alimentation

  Modèles d’Amérique du Nord :  

120 V CA, 60 Hz

  Autres modèles :  

220-230 V CA, 50/60 Hz

Consommation

  Modèles d’Amérique du Nord :  

100 W/inférieure à 0.9 W (mode 

de pause)

  Autres modèles :  

90 W/inférieure à 0.9 W (mode 

de pause)

Dimensions (l/h/p) 

environ 197  410  505 mm  

(7 7/8  16 1/4  20 po.),  

avec grille avant

Poids 

environ 13 kg (28 li. 10 on)

Accessoires fournis
Cordon de raccordement audio (1)*

Cordons d’enceintes (4)*

Cordons d’enceintes (3)*

Supports de montage (2)

Support d’enceinte (pour enceintes surround/arrière 

surround) (2)

Vis (6)

* A l’exception des modèles pour l’Amérique du Nord.

La conception et les spécifications sont sujettes à modification 

sans préavis.

0.665363s