Sony SA-WM500 User's Manual

Sony Speakers User's Manual - SA-WM500.
Download
Page  of 2
4.9, 1641 votes
background image

SA-WM500 (GB/FR) 4-244-254-11(1)

Active Subwoofer

SA-WM500

4-244-254-12(1)

 English

 WARNING

To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.

Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.

NOTICE FOR THE CUSTOMERS IN THE USA

This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.

This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

CAUTION

You are cautioned that any changes or modification not
expressly approved in this manual could void your
authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.

For detailed safety precautions, see the leaflet
“IMPORTANT SAFEGUARDS” included with this
manual in the vinyl bag.

ENERGY STAR® is a U.S. registered mark.
As an 

ENERGY STAR® partner, Sony Corporation has

determined that this product meets the 

ENERGY STAR®

guidelines for energy efficiency.

CAUTION

Use of this applicance with some systems may present a
shock or fire hazard. Do not use with any units which
have the following marking located near output.
WARNING: HAZARDOUS ENERGY!

NOTICE FOR THE CUSTOMERS IN CANADA

CAUTION

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS
POLARIZED AC PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.

Owner’s Record

The model number and serial numbers are located
on the rear of the unit.  Record the serial number in
the space provided below.  Refer to them
whenever you call upon your Sony dealer
regarding this product.

Model No. SA-WM500

Serial No. 

Precautions

On safety

• Before operating the subwoofer, be sure that the

operating voltage of your subwoofer is identical with
that of your local power supply.

• Unplug the subwoofer from the wall outlet if it is not to

be used for an extended period of time.  To disconnect
the cord, pull the cord by grasping the plug.  Never
pull the cord itself.

• Should any liquid or solid object fall into the

subwoofer, unplug the subwoofer and have the
subwoofer checked by qualified personnel before
operating it any further.

• AC power cord must be changed only at the qualified

service shop.

When turning on or off an amplifier or other
equipment

Lower the volume of the amplifier to minimum.

To avoid damaging the subwoofer

• Be careful in setting the volume control of the amplifier

to avoid an excessive input power.

• Do not attempt to open the enclosure or remold

speaker units and networks.

In case color irregularity is observed on the
nearby TV screen

With the magnetically shielded type of the speaker
system, the speakers can be installed near a TV set.
However, color irregularity may still be observed on the
TV screen depending on the type of your TV set.

If color irregularity is observed...

t Turn off the TV set once, then turn it on after 15 to

30 minutes.

If color irregularity is observed again...

t Place the speakers further apart from the TV set.

When howling occurs

Relocate the speaker or turn down the volume of the
amplifier.

On installation

• Do not install the subwoofer near heat sources such as

radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.

• Good ventilation is essential to prevent internal heat

build-up in the subwoofer.  Place the subwoofer in a
location with adequate air circulation.  Do not place the
subwoofer on a soft surface.

• Use caution when placing the speaker on a specially

treated (waxed, oiled, polished, etc.) floor, as staining
or discoloration may result.

• Take care to avoid any possible injury on the corners of

the subwoofer.

On cleaning the cabinet

Clean the cabinet with a soft cloth lightly moistened with
water.  Do not use any type of abrasive pad, scouring
powder or solvent such as alcohol or benzine.

If you have any questions or problems concerning your
subwoofer that is not covered in this manual, please
consult your nearest Sony dealer.

Installation

Since the human ear cannot detect the direction and
position where the bass sound being reproduced by a
subwoofer (below 200 Hz) comes from, you can install
the subwoofer wherever you like in your room.  To
obtain a better bass reproduction, we recommend you
to install the subwoofer on a solid floor where the
resonance is unlikely to occur.
You can obtain sufficient heavy bass reproduction from a
single subwoofer.  However, if you use a couple of
subwoofers, you can obtain an even more effective heavy
bass reproduction.

Notes

• Always install the subwoofer vertically, keeping a few

centimeters away from the wall.

• Do not place an object on the subwoofer or sit on it.
• If the subwoofer is installed in the center of a room, the

bass could be extremely weakened.  This is due to the
influence of the standing wave of the room.  If this
happens, move the subwoofer away from the center of
a room or eliminate the cause of the standing wave, by
installing a bookshelf on the wall, etc.

 Français

 2003 Sony Corporation

Printed in Malaysia

 AVERTISSEMENT

Pour éviter tout risque de feu ou de choc électrique,
ne pas exposer cet appareil à la pluie ou à l’humidité.
Pour éviter tout risque d’incendie, ne couvrez pas les
ouïes de ventilation de cet appareil avec des journaux,
une nappe, un rideau, etc. Par ailleurs, ne déposez pas
une bougie allumée sur l’appareil.
Pour éviter tout risque d’incendie et de secousse
électrique, ne déposez aucun objet remplis de liquide,
tels qu’un vase, sur l’appareil.

N’installez pas l’appareil dans un espace confiné
comme dans une bibliothèque ou un meuble
encastré.

ENERGY STAR® est une marque déposée aux États-Unis.
Partenaire de 

ENERGY STAR®, Sony Corporation a

déterminé que cet appareil est conforme aux
recommandations de 

ENERGY STAR® en matière de

rendement énergétique.

NOTICE POUR LES CLIENTS AU CANADA

ATTENTION

POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS
UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES
LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.

 AVERTISSEMENT

Précautions

Sécurité

• Avant d’utiliser le caisson de grave, vérifiez que sa

tension de fonctionnement est identique à celle du
secteur local.

• Si vous prévoyez de ne pas utiliser le caisson pendant

longtemps, débranchez-le de la prise murale. Pour
débrancher le cordon d’alimentation secteur, tirez sur
la fiche. Ne jamais tirer sur le cordon proprement dit.

• Si un liquide ou un solide tombait dans le coffret,

débranchez le caisson et faites-le contrôler par un
technicien qualifié avant de le remettre en service.

• Le cordon d’alimentation secteur doit être changé par

un professionnel seulement.

Avant d’allumer ou d’éteindre l’amplificateur
ou un autre appareil

N’oubliez pas de baisser complètement le volume.

Pour éviter d’endommager le caisson de grave

• Réglez avec soin le volume de l’amplificateur pour éviter

toute entrée de son excessive.

• Ne pas essayer d’ouvrir le coffret ou de modifier les haut-

parleurs et les circuits.

Si vous observez des anomalies de couleurs sur
l’écran du  téléviseur installé à proximité du
caisson

Normalement les enceintes ont un blindage magnétique et
peuvent être installées près d’un téléviseur, mais il est
possible d’observer des anomalies de couleurs avec certains
types de téléviseur.

Si vous observez des anomalies de couleurs...

t Eteignez le téléviseur, puis rallumez-le 15 à 30

minutes plus tard.

S’il n’y a aucun changement...

t Eloignez les enceintes du téléviseur.

En cas de rétroaction acoustique

Changez l’emplacement des enceintes ou baissez le volume
de l’amplificateur.

Installation

• Ne pas installer le caisson de grave près d’une source de

chaleur, comme un radiateur ou une bouche d’air chaud,
dans un endroit en plein soleil ou exposé à de la
poussière, des vibrations ou des chocs mécaniques.

• Une bonne ventilation est essentielle pour éviter une

surchauffe interne du caisson. Installez le caisson dans un
endroit où la circulation d’air est suffisante. Ne pas
l’installer sur une surface molle.

• Prenez les précautions nécessaires lors de l’installation du

haut-parleur sur un plancher traité (ciré, huilé, verni, etc.)
pour éviter l’apparition de taches ou la décoloration du
sol.

• Veillez á ne pas vous blesser en heurtant les coins du

caisson.

Nettoyage du coffret

Nettoyez le coffret avec un chiffon doux légèrement
imprégné d’eau. Ne pas utiliser de tampons abrasifs,
poudre à récurer ou diluant, comme l’alcool ou la benzine.

Pour toute question ou problème au sujet du caisson de
grave, veuillez contacter votre revendeur Sony le plus
proche.

Hooking Up the System

Overview
Use the LINE IN jacks or the SPEAKER IN terminals of
the subwoofer when you connect the amplifier.
• If your amplifier has one of the following types of

output jacks, connect the LINE IN jack and the
amplifier's  jack using the supplied audio connecting
cord.
— MONO OUT jack
— MIX OUT jack
— SUBWOOFER output jack(s)
— SUPER WOOFER output jack(s)

• If your amplifier does not have the above mentioned

output jacks, connect the speaker terminals of the
amplifier to the SPEAKER IN terminals instead. (A)

Before you get started
• Turn off the power of the amplifier and the subwoofer

before making any connection.

• Use the audio connecting cords that are supplied to

the respective equipment.  If there are not enough
audio connecting cords to make the necessary
connections, you need to purchase some optional
audio connecting cords.

• Be sure to make connections firmly to avoid noise.
• Connect the AC power cord from the subwoofer to

a wall outlet.

• You cannot connect the CENTER output jack for use

with Dolby Pro Logic function to the subwoofer.
Bass sound is not output with some Dolby Pro Logic
modes.

Connecting to an amplifier with a
single set of speaker terminals (
B)
If your amplifier is equipped with a single set of speaker
terminals, connect the subwoofer to the amplifier, and
then connect the front speakers to the subwoofer.

Hookups

Connect the subwoofer to the amplifier.

Connect the SPEAKER IN terminals of the
subwoofer to the amplifier’s speaker
terminals with the speaker cords.  Be sure to
connect both L and R channels.

Connect the front speakers to the subwoofer.

Connect the speakers to the SPEAKER OUT
terminals of the subwoofer.

Connecting to an amplifier with
double (A+B) sets of speaker
terminals (
C)
If your amplifier has double (A+B) sets of speaker
terminals, connect both the subwoofer and the front
speakers to the amplifier.

Hookups

Connect the front speakers to the amplifier.

Connect the speakers to your amplifier’s
SPEAKER A terminals.

Connect the subwoofer to the amplifier.

Connect the SPEAKER IN terminals of the
subwoofer to the amplifier’s SPEAKER B
terminals using the supplied speaker cords.

When using the double (A+B) sets of speakers, make
sure that you select the “A+B” position with your
amplifier.

Note

When you are using SPEAKER A terminal (front
speaker) only or when the power of the amplifier is
turned off, turn down the volume or turn off the power
of the subwoofer.  Otherwise, hum noise may be heard.

 LINE IN

 SPEAKER IN

Amplifier
Amplificateur

This subwoofer
Caisson de grave

IN

OUT

L

SPEAKER

L

R

R

SPEAKER

This subwoofer
Caisson de grave

IN

OUT

L

SPEAKER

L

R

R

Front Speaker (R)
Enceinte avant (D)

Front Speaker (L)
Enceinte avant (L)

SPEAKER  A

IN

OUT

L

SPEAKER

L

R

R

SPEAKER  B

A

1

B

2

1

C

2

Amplifier
Amplificateur

Front Speaker (R)
Enceinte avant (D)

Front Speaker (L)
Enceinte avant (L)

Amplifier
Amplificateur

This subwoofer
Caisson de grave

Installation

Comme l’oreille humaine ne peut pas détecter la direction ni
la position des basses reproduites par un caisson de grave
(en dessous de 200 Hz), vous pouvez installer le caisson où
vous voulez dans la pièce. Pour obtenir une meilleure
reproduction du grave, il est toutefois conseillé de l’installer
sur un sol ferme, où la résonnance est peu probable.
Vous pouvez obtenir une reproduction des graves
suffisamment puissante en utilisant qu’une seule
enceinte d’extrêmes graves. Toutefois, si vous installez
une paire d’enceinte d’extrêmes graves, la reproduction
des graves que vous obtiendrez sera beaucoup plus
puissante.

Remarques

• L’enceinte d’extrêmes graves doit toujours se trouver

verticale, à quelques centimètres de la paroi du mur.

• Ne pas poser d’objet sur le caisson ni s’asseoir dessus.
• Si le caisson est installé au centre d’une pièce, le son grave

est extrêmement affaibli. Ce phénomème est dû aux ondes
stationnaires de la pièce.  Le cas échéant, éloignez le
caisson du centre de la pièce, ou éliminez la cause des
ondes stationnaires, en installant, par exemple, une
étagère.

Raccordement du système

Aperçu
Utilisez les prises LINE IN ou les bornes SPEAKER IN du
caisson quand vous raccordez l’amplificateur.
• Si votre amplificateur comporte l’un des modèles de

prises de sortie suivants, raccordez-la à la prise LINE IN
et la prise de l’amplificateur à l’aide du câble de
connexion audio fourni.

Prises MONO OUT

Prise MIX OUT

Prise(s) de sortie SUBWOOFER

Prise(s) de sortie SUPER WOOFER

• Si l’amplificateur n’offre aucune des prises de sortie

indiquées, reliez les bornes d’enceintes de l’amplificateur
aux bornes SPEAKER IN. (A)

Avant de commencer
• Eteignez l’amplificateur et le caisson de grave avant de les

relier.

• Utilisez les cordons audio fournis avec les différents

appareils. Si vous n’avez pas assez de cordons pour faire
les liaisons nécessaires, vous devrez acheter des cordons
de liaison audio en option.

• Veillez à insérer à fond les fiches dans les prises pour

éviter toute source de bruit.

• Branchez le cordon d’alimentation secteur du caisson sur

une prise murale.

• Vous ne pouvez pas relier la prise de sortie CENTER à ce

caisson pour utiliser la fonction Dolby Pro Logic. Le son
grave n'est pas fourni par certains modes Dolby Pro Logic.

Raccordement à un amplificateur avec
une seule paire de bornes d’enceintes
(
B)
Si votre amplificateur n’a qu’une seule paire de bornes
d’enceintes, raccordez le caisson de grave à l’amplificateur,
puis les enceintes avant au caisson de grave.

Raccordements

Raccordez le caisson de grave à l’amplificateur.

Raccordez les bornes SPEAKER IN du caisson
aux bornes d’enceintes de l’amplificateur avec
les cordons d’enceintes. Veillez à raccorder les
canaux gauche (L) et droit (R).

Raccordez les enceintes avant au caisson de

grave.
Raccordez les enceintes aux bornes SPEAKER
OUT du caisson de grave.

Raccordement à un amplificateur avec
double paire (A+B) de bornes
d’enceintes (
C)
Si votre amplificateur a une double paire de bornes
d’enceintes (A+B), raccordez le caisson de grave et les
enceintes avant à l’amplificateur.

Raccordements

Raccordez les enceintes avant à l’amplificateur.

Reliez les enceintes aux prises SPEAKER A
de l’amplificateur.

Raccordez le caisson de grave à l’amplificateur.

Reliez les prises SPEAKER IN de l’enceinte
d’extrêmes graves aux prises SPEAKER B de
l’amplificateur en vous servant des cordons
d’enceinte fournis.

Quand vous utilisez la double paire de prises (A+B), veillez
à sélectionner la position “A+B” sur l’amplificateur.

Remarque

Si vous n’utilisez que la prise SPEAKER A (enceinte
avant), ou encore si l’alimentation de l’amplificateur est
coupée, diminuez le niveau sonore ou bien coupez
l’alimentation de l’enceinte d’extrêmes graves. Dans le
cas contraire, vous pourriez entendre un ronflement.

IN

OUT

IN

OUT

OFF

AUTO

LINE

L

SPEAKER

POWER SAVE

L

R

R

0.588832s