Sony PCWA-C150S Troubleshooting

Sony Wireless LAN Computers Troubleshooting - PCWA-C150S.
Download
Page  of 2
4.4, 1832 votes
background image

Check the “Sony PCWA-C150 Wireless PC Card” IP address.

If your IP address starts with “169.254...”, then the network connection has not been
established. You may have typed the WEP key incorrectly.

Reconfigure the WEP key with Client Manager. (For details, refer to the Quick Start Guide
or manual.)

■ I changed the Access Point’s operation mode or I switched to a

different Access Point, and I cannot establish the connection.

For Windows Me users, when your Access Point configuration is changed to a
different mode, make sure to update the IP address as follows:

From the “Start” menu, click “Run”.

Type “winipcfg” (without quotation marks), and click “OK”.

The IP Configuration dialog box appears.

Select “Sony Wireless PC Card” from the drop-down list, and click “Release”.

Click “Renew”.

Wait until the new IP address is obtained.

■ In Peer-to-Peer mode, the signal strength is not displayed. How do I

tell whether a peer-to-peer connection has been successfully
established?

Because in Peer-to-Peer mode your computer can connect to multiple other
computers, each with its own signal strength, a signal strength cannot be
displayed.

To verify the connection in Peer-to-Peer mode, performe the following
procedures.

❑ Windows Me and Windows 2000

Double-click the My Network Places icon on the desktop.

Double-click “Computers Near Me”.

Press the F5 key to update.

Check whether your peers exist on your network.

❑ Windows XP

Access “My Network Places”.

Press the F5 key to update.

Check whether your peers exist on your network.

■ “Renewing IP address failed” message appears in Peer-to-Peer

mode (Windows 2000). What should I do?

“Renewing IP address failed” or “DHCP Server Unavailable: Renewing adapter”
message appears when the IP address is not obtained from the DHCP server.

If these messages appear, click “OK”. In Peer-to-Peer mode, Windows releases
the IP address, so performance is not affected.

4-665-919-11(1)

Sony Corporation 

 2002 Printed in Japan

2.4GHz
Wireless LAN PC Card

PCWA-C150S

Troubleshooting Guide

■ How do I verify that I have connected to the Internet successfully?

Even if the RF signal indicates 

 “Excellent”, an Internet connection may not

have been established.

If you cannot access the Internet, you may have typed the WEP key wrong. Verify
that you are connected to the network properly by performing the following
procedures.

❑ Windows Me

From the “Start” menu, click “Run”.

Type “winipcfg” (without quotation marks), and click “OK”.

The IP Configuration dialog box appears.

Select “Sony Wireless PC Card” from the drop-down list.

If your IP address starts with “169.254...”, then the network connection has not been
established. You may have typed the WEP key incorrectly.

Reconfigure the WEP key with Client Manager. (For details, refer to the Quick Start Guide
or Operating Instractions (PDF file).)

❑ Windows 2000 and Windows XP

From the “Start” menu, click “Run”.

Type “cmd” (without quotation marks), and click “OK”.

Type “ipconfig /all” (without quotation marks and with one space between

“ipconfig” and “/all”), and press the Enter key.

(Windows 2000 example)

Continued on next page

0.606377s