Sony DSC-W30 Reading Guide

Sony Cameras Reading Guide - DSC-W30.
Download
Page  of 2
4.1, 2402 votes
background image

2-673-368-11 (1)

© 2006 Sony Corporation  Printed in Japan

Printed on 100% recycled paper using VOC 
(Volatile Organic Compound)-free vegetable 
oil based ink.

continued on the reverse 

Prepare the battery pack

• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.

• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source 

(mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the 
battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

• When charging is finished, disconnect the battery charger from the wall outlet (wall socket), and remove the 

battery pack from the battery charger.

• The time required to fully charge the battery pack (supplied) from when it is completely discharged at a 

temperature of 25°C (77°F) is approximately 330 min., and the practical charging time is approximately 
270 min. Charging may take longer under certain circumstances or conditions.

1

Battery charger

Lift out the inlet plug and 

connect to the wall outlet 
(wall socket).

Insert the battery pack.

Push the back part of the battery pack 
gently until it clicks into place.

CHARGE lamp

Light on: Charging

Light off: Completed (Practical charge)

If you continue charging the battery pack for about 
one more hour (until it is fully charged), the 
charge will last slightly longer.

Plug

Insert the charged battery pack.

Open the battery/
“Memory Stick Duo” 
cover. 

Insert the battery pack while 
pressing the battery eject lever 
with the tip of the battery.

Close the battery/
“Memory Stick Duo” 
cover.

Battery eject lever

Using the AC Adaptor

You can connect the camera to a wall outlet (wall socket) using the AC-LS5K AC Adaptor (not 
supplied). 

“User’s Guide/Troubleshooting” (page 18).

To check the remaining battery time

Press POWER button to turn on and check the remaining battery on the LCD screen.

• It takes about one minute until the correct battery remaining indicator appears.

• The displayed battery remaining indicator may not be correct under certain circumstances.

To remove the battery pack

Slide the battery eject lever to pull the battery pack out. Be sure not to drop the battery pack 
when pulling it out.

To use your camera abroad — Power sources

You can use your camera, the battery charger, and the AC-LS5K AC Adaptor (not supplied) in 
any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. 

Do not use an electronic transformer (travel converter), as this may cause a 
malfunction.

Battery 
remaining 
indicator

Battery 
remaining 
guidelines

Sufficient 
power 
remaining

Battery half full

Battery low, 
recording/
playback will 
stop soon.

Change the battery with 
fully charged one, or charge 
the battery. (The warning 
indicator flashes.)

Battery eject lever

Turn the camera on/set the clock

2

Select .

Press the POWER button.

Lighting

Set the clock with the control 

button.

Select the date display format with v/V, then press 

z.

Select each item with b/B and set the numeric value 

with v/V, then press z.

Select [OK] with B, then press z.

• To cancel, select [Cancel] and press z.

2006 /

:

/

  1

  1

12

00

AM

OK

Cancel

Clock Set

D/M/Y

M/D/Y

Y/M/D

2006 /

:

/

  1

  1

12

00

AM

OK

Cancel

Clock Set

D/M/Y

M/D/Y

Y/M/D

2006 /

:

/

  1

  1

10

30

AM

OK

Cancel

Clock Set

D/M/Y

M/D/Y

Y/M/D

To change the date and time

Select [Clock Set] in the 

 (Setup) screen and perform the procedure in step 3 above. 

“User’s Guide/Troubleshooting” (pages 46 and 55)

On the clock display

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

• If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.

When turning on the power

• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.

• Do not touch the lens portion as the cover opens and the lens portion extends. Also, do not leave the camera 

with the lens portion extended for a long period of time with the power off as this may cause malfunction.

• The following screen appears when the camera is turned on for the second time or afterwards.

To turn off the power

Press the POWER button again.

• If the camera is running on battery power and you do not operate the camera for about three minutes, the 

camera turns off automatically to prevent wearing down the battery pack (Auto power-off function).

Changing the language setting

You can change the screen display to show messages in a specified language. To change the 
language setting, press MENU to display the menu screen. Select 

 (Setup) with the control 

button, then, select [

 Language] in 

 (Setup1), and select the desired language. 

“User’s 

Guide/Troubleshooting” (page 53)

A

1

Insert a “Memory Stick Duo” (not 

supplied)

Select the image size for use

When there is no “Memory Stick Duo” inserted

The camera records/plays back images using the internal memory. 

“User’s Guide/

Troubleshooting” (page 26)

3

Insert the “Memory Stick Duo” 
all the way in until it clicks.

Terminal side

Labeled side

4

 button

Select a mode.

Select .

Select .

Still image:

Movie:

Press 

 (Image Size).

Select the size with v

 

/

 

V.

• The screen above is for still images.

• For movies, select [640(Fine)] (“Memory Stick PRO 

Duo” only), [640(Standard)] or [160].

Press 

 (Image Size) to 

complete the setting.

Image Size

Up to 10x15cm/4x6"print
Appx. Image Capacity

33pics

On still image sizes

For details on the image size 

“User’s Guide/Troubleshooting” (page 15)

1) Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc.
2) Both edges of the image may be cut off when printing t “User’s Guide/Troubleshooting” (page 89)
3) By using a Memory Stick slot or USB connection, you can enjoy higher quality images.

On the recordable number of still images and recordable time of movies

Recordable number of still images and recordable time of movies vary depending on the image 
size selected.

For details on recordable number or time 

“User’s Guide/Troubleshooting” (page 24)

• The number of recordable images and time can differ according to shooting conditions.

To remove a “Memory Stick Duo”

Image size

Guidelines

No. of images

Printing

7M (DSC-W70 the default 
setting) 

Up to A3/11×17"print

Less

More

Fine

Rough

6M (DSC-W30/W40/W50 the 
default setting)

Up to A4/8×10"print

3:2

1) 

Match 3:2 Aspect Ratio

5M (DSC-W70) 

Up to A4/8×10"print

3M

Up to 13×18cm/5×7"print

2M

Up to 10×15cm/4×6"print

VGA

For E-mail

16:92)

Display On 16:9 HDTV3)

Still images

Movies

Access lamp

Open the battery/“Memory Stick Duo” cover, then push the 
“Memory Stick Duo” in once.

When the access lamp is lit

Never remove the battery/“Memory Stick Duo” or turn off 
the power. The data may be corrupted.

Maximum number 
of recordable 
images

Maximum 
recordable time

Digital Still Camera

Read This First

DSC-W30/W40/W50/W70

Operating Instructions

Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate 
volume)
 thoroughly, and retain them for future reference.

http://www.sony.net/

Checking the accessories supplied

A “Memory Stick Duo” is not 
supplied.
The camera has its own internal 
memory 58 MB (DSC-W70) or 
32 MB (DSC-W30/W40/W50), 
however, purchase of a 
“Memory Stick Duo” is 
recommended for shooting more 
images.

“Memory Stick Duo”: you can 
use a “Memory Stick Duo” 
with your camera.

“Memory Stick”: you cannot 
use a “Memory Stick” with 
your camera.

Other memory cards cannot 
be used.

• For details on “Memory Stick 

Duo” 

t “User’s Guide/

Troubleshooting”

 (page 95)

• Battery charger BC-CSG (1)

• Rechargeable battery pack 

NP-BG1 (1)/Battery case (1)

• USB, A/V cable for multi-

use terminal (1) 
(DSC-W50/W70)

• USB cable (1) (DSC-W30/

W40)

• A/V cable (1) (DSC-W30/W40)

• Wrist strap (1) (DSC-W30/W50/

W70)

• Neck strap (1) (DSC-W40)

• Soft carrying case (1) 

(DSC-W40)

• CD-ROM (Cyber-shot 

application software) (1)

• Operating instructions: “Read 

This First” (this manual) (1)

• Operating instructions: “User’s 

Guide/Troubleshooting” (1)

Notes

• Charge the battery pack (supplied) before using the camera for the first time.

• The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the 

pixels are operational for effective use. However, there may be some tiny black points and/or bright 
points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are 
normal in the manufacturing process and do not affect the recording in any way.

• The camera is a precision instrument. Be careful not 

to bump the lens or the LCD screen, and not to apply 
force to it. Attach the strap to prevent the camera 
from damage by being dropped, etc.

• Designed for use with compatible Sony batteries.

Additional information on this product and answers to frequently asked questions can be 
found at our Customer Support Website.

Hook

0.673711s