Sony CMTG1IP User's Manual

Sony Stereo System User's Manual - CMTG1IP.
Download
Page  of 2
4.4, 2350 votes
background image

4-283-813-14(1)

Micro HI-FI

Component System

GB

 Operating Instructions

©2011   Sony Corporation     Printed in China

CMT‑G1iP/G1BiP

WARNING

To reduce the risk of fire, do not cover the ventilation 

opening of the apparatus with newspapers, tablecloths, 

curtains, etc. Do not place the naked flame sources such 

as lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose 

this apparatus to dripping or splashing, and do not 

place objects filled with liquids, such as vases, on the 

apparatus.
Do not install the appliance in a confined space, such as a 

bookcase or built-in cabinet.
As the main plug is used to disconnect the unit from the 

mains, connect the unit to an easily accessible AC outlet. 

Should you notice an abnormality in the unit, disconnect 

the main plug from the AC outlet immediately.
Do not expose batteries or apparatus with battery-

installed to excessive heat such as sunshine, fire or the 

like.
The unit is not disconnected from the mains as long as it 

is connected to the AC outlet, even if the unit itself has 

been turned off. 

CAUTION

The use of optical instruments with this product will 

increase eye hazard.

This appliance is classified 

as a CLASS 1 LASER 

product. This marking 

is located on the rear 

exterior.

Notice for customers: the following 

information is only applicable to 

equipment sold in countries applying EU 

directives.

The manufacturer of this product is Sony Corporation, 

1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The 

Authorized Representative for EMC and product safety is 

Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 

Stuttgart, Germany. For any service or guarantee matters 

please refer to the addresses given in separate service or 

guarantee documents.

  Disposal of Old Electrical & 

Electronic Equipment  

(Applicable in the European 

Union and other European 

countries with separate 

collection systems)

This symbol on the product or on its packaging 

indicates that this product shall not be treated as 

household waste. Instead it shall be handed over to 

the applicable collection point for the recycling of 

electrical and electronic equipment. By ensuring this 

product is disposed of correctly, you will help prevent 

potential negative consequences for the environment 

and human health, which could otherwise be caused 

by inappropriate waste handling of this product. The 

recycling of materials will help to conserve natural 

resources. For more detailed information about recycling 

of this product, please contact your local Civic Office, 

your household waste disposal service or the shop where 

you purchased the product.

Applicable accessory: Remote commander

  Disposal of waste batteries 

(applicable in the European 

Union and other European 

countries with separate 

collection systems)

This symbol on the battery or on the packaging indicates 

that the battery provided with this product shall not be 

treated as household waste.

On certain batteries this symbol might be used in 

combination with a chemical symbol. The chemical 

symbols for mercury (Hg) or lead (Pb) are added if the 

battery contains more than 0.0005% mercury or 0.004% 

lead.

By ensuring these batteries are disposed of correctly, 

you will help prevent potential y negative consequences 

for the environment and human health which could 

otherwise be caused by inappropriate waste handling of 

the battery. The recycling of the materials will help to 

conserve natural resources.

In case of products that for safety, performance or data 

integrity reasons require a permanent connection with 

an incorporated battery, this battery should be replaced 

by qualified service staff only. To ensure that the battery 

will be treated properly, hand over the product at end-of-

life to the applicable collection point for the recycling of 

electrical and electronic equipment.

For all other batteries, please view the section on how 

to remove the battery from the product safely. Hand the 

battery over to the applicable collection point for the 

recycling of waste batteries.

For more detailed information about recycling of this 

product or battery, please contact your local Civic Office, 

your household waste disposal service or the shop where 

you purchased the product.

Excessive sound pressure from earphones and 

headphones can cause hearing loss.

Note on DualDiscs

A DualDisc is a two sided disc product which mates 

DVD recorded material on one side with digital 

audio material on the other side. However, since the 

audio material side does not conform to the Compact 

Disc (CD) standard, playback on this product is not 

guaranteed.

Music discs encoded with copyright 

protection technologies

This product is designed to playback discs that conform 

to the Compact Disc (CD) standard. Recently, various 

music discs encoded with copyright protection 

technologies are marketed by some record companies. 

Please be aware that among those discs, there are some 

that do not conform to the CD standard and may not be 

playable by this product.

License and Trademark Notice

iPhone, iPod, iPod classic, iPod nano, and iPod touch 

are trademarks of Apple Inc., registered in the U.S. and 

other countries.

MPEG Layer-3 audio coding technology and patents 

licensed from Fraunhofer IIS and Thomson.

Windows Media is either a registered trademark or 

trademark of Microsoft Corporation in the United 

States and/or other countries.

This product is protected by certain intellectual 

property rights of Microsoft Corporation. Use or 

distribution of such technology outside of this product 

is prohibited without a license from Microsoft or an 

authorized Microsoft subsidiary.

All other trademarks and registered trademarks are of 

their respective holders. In this manual, 

™ and ® marks 

are not specified.

Getting Started

Location of Controls

Unit (Front)

(Rear)

(power)button
STANDBYindicator
Disctray
Display
(open)button
Playbackbuttons(/)
TUNING+/buttons

/(goback/goforward)buttons

/(rewind/fastforward)buttons

 (USB)port
PHONESjack
BASS/TREBLEknobs
FUNCTIONknob
VOLUMEknob
Remotesensor
AUDIOIN1/2jacks
SPEAKERSterminals
ACINjack
ANTENNADAB75Ωterminal(CMT‑G1BiPonly)
ANTENNAFM75ΩCOAXIALterminal
ANTENNAAMterminal

Remote

(power)button
/(goback/goforward)buttons

+/(tuning)buttons

/(rewind/fastforward)buttons
 +/(selectfolder)buttons
Playbackbuttons(//)
FUNCTION+/buttons
VOLUME+/buttons
EQbutton
TIMERMENUbutton
TOOLMENUbutton
///buttons
RETURNbutton
ENTERbutton
CLEARbutton
TUNERMEMORYbutton
REPEAT/FMMODEbutton
PLAYMODE/TUNINGMODEbutton
SLEEPbutton
DISPLAYbutton

 Αntennas

Find a location and an orientation that provide good 

reception, and then set up the antenna. 

Keep the antennas away from the speaker cords and the 

AC power cord to avoid picking up noise.

 DAB antenna (CMT‑G1BiP only)

With a DAB external antenna (not supplied), you can 

obtain higher DAB/DAB+ broadcast sound quality. 

We recommend that you use the DAB lead antenna 

(supplied) only temporarily until you install a DAB 

external antenna.

 Power

Connect the AC power cord to a wall outlet.

When you press , the system turns on.

 Speakers

First, remove the cover attached to the end of the speaker 

cord.

Connect the speaker cords to the SPEAKERS terminals 

on the unit.

Connect the other end of the speaker cords to the 

terminals on the speakers as shown below.

Fasten the speaker cord using the screws of the 

SPEAKERS terminals firmly.

Black

Notes on cleaning the speakers

Wipe it with soft dry cloth (non-starched). (Do not ever use a 

scrubbing brush or sponge.)

To maintain the continued polish of the cabinet, do not wipe it 

vigorously right from the start, but first brush away dust with a soft 

brush or a duster before you wipe it with soft dry cloth.

If it is stained with oil or fingerprints, breath on the surface and 

wipe it with soft dry cloth.

If the stain is tough to remove, wipe it with soft cloth washed in 

lukewarm soapy water. (Do not use a neutral detergent.)

Do not use thinner, benzene, alcohol, or hair liquid, which may 

damage the surface.

Be careful not to scrape the cabinet.

Be careful not to drop a lit cigarette or match, as it may damage the 

surface.

To attach the speaker pads

Attach the speaker pads (supplied) to the bottom of the 

speakers to prevent from slipping.

To use the iPod/iPhone

Connect the iPod/iPhone to the   (USB) port using a 

USB cable supplied with your iPod/iPhone.


or

or

or

Black

Operations

Playing a CD/MP3 disc
1
 SelecttheCDfunction.

Press FUNCTION +/ repeatedly.

2 Placeadisc.

Press  on the unit, and place a disc with

the label side up on the disc tray.

To close the disc tray, press  on the unit.

3 Startplayback.

Press .

Other operations
To

Press

Pause playback

. To resume play, press the button 

again.

Stop playback

.

Select a folder on 

an MP3 disc

 +/ repeatedly.

Select a track or 

file

/.

Find a point in a 

track or file 

Hold down / during 

playback, and release the button at 

the desired point.

Select Repeat Play REPEAT/FM MODE repeatedly 

until “REP” or “REP1” appears.

To change the play mode

Press PLAY MODE/TUNING MODE repeatedly while 

the player is stopped. You can select the Normal Play 

mode (“ ” for all MP3 files in the folder on the disc), 

Shuffle Play mode (“SHUF” or “  SHUF*” for folder 

shuffle), or Program Play mode (“PGM”).

* When playing a CD-DA (audio) disc, 

 (SHUF) Play performs 

the same operation as normal (SHUF) Play.

Note on Repeat Play

“REP1” indicates that a single track or file is repeated until you stop 

playback.
Notes on the Shuffle Play mode

When the Shuffle Play mode is set to “SHUF,” the system shuffle-

plays all tracks or files on the disc. When the Shuffle Play mode is 

set to “

 SHUF,” the system shuffle-plays all tracks or files in the 

selected folder. 

When you turn off the system, the selected Shuffle Play mode 

(“SHUF” or “

 SHUF”) is cleared and the play mode returns to 

the Normal Play mode (“

”).

Notes on playing MP3 discs

Do not save other types of tracks or files, or unnecessary folders on 

a disc that has MP3 files.

Folders that have no MP3 files are skipped.

MP3 files are played back in the order that they are recorded onto 

the disc.

The system can only play MP3 files that have a file extension of 

“.mp3.”

Even when file name has the “.mp3” file extension, if the actual 

file differs, playing this file may generate a loud noise which could 

damage the speaker system and the system may malfunction.

The maximum number of:

folders is 255 (including the root folder).

MP3 files is 511.

MP3 files and folders that can be contained on a single disc is 512.

folder levels (the tree structure of files) is 8.

Compatibility with all MP3 encoding/writing software, recording 

device, and recording media cannot be guaranteed. Incompatible 

MP3 discs may produce noise or interrupted sound or may not play 

at al .

Notes on playing multisession discs

If the first session on the disc is a CD-DA session, the other sessions 

on the disc cannot be recognized regardless of the session format; 

only CD-DA tracks in the first session can be played back.

If the session format for the first session is CD-ROM and the 

following sessions are recorded in the same format, the system will 

continue to play back MP3 files accordingly in multiple sessions 

until the system encounters another session recorded in a different 

format.

Creating your own program 

(Program Play)
1
 SelecttheCDfunction.

Press FUNCTION +/ repeatedly.

2 Selecttheplaymode.

Press PLAY MODE repeatedly until “PGM” appears 

while the player is stopped.

3 Selectthedesiredtrackorfilenumber.

Press / repeatedly until the desired track or 

file number appears.

When programming audio files, press   +/ 

repeatedly to select the desired folder, and then select 

the desired file.

Selected track or file number

Total playing time of the selected 

track or file

4 Programtheselectedtrackorfile.

Press ENTER to enter the selected track or file.

5 Repeatsteps3through4toprogramadditional

tracksorfiles,uptoatotalof25tracksorfiles.

6 Toplayyourprogramoftracksorfiles,press.

The program remains available until you remove the 

disc from the disc tray or unplug the AC power cord.

To play the same program again, press .





To cancel Program Play

Press PLAY MODE/TUNING MODE repeatedly until 

“PGM” disappears while the player is stopped.
To delete the last track or file of the program

Press CLEAR while the player is stopped.
To view program information

Press DISPLAY repeatedly while the player is stopped.

Listening to the radio
The DAB/DAB+ tuning is only available for CMT-G1BiP.
1 Select“TUNERDAB,”“TUNERFM”or“TUNERAM.”

Press FUNCTION +/ repeatedly.

2 Performtuning.

For automatic scanning
Press PLAY MODE/TUNING MODE repeatedly 

until “AUTO” appears, and then press +/. Scanning 

stops automatical y when a station is tuned in, and 

“TUNED” and “STEREO” (for stereo programs only) 

light up in the display.

If “TUNED” does not light up and the scanning for 

an FM or AM station does not stop, press  to stop 

scanning, then perform manual tuning (below).

When you tune in a DAB/DAB+ station or an FM 

station that provides the RDS services, information 

such as the service name or station name is provided 

by broadcasts.
For manual tuning (FM/AM band only)
Press PLAY MODE/TUNING MODE repeatedly until 

“AUTO” and “PRESET” disappear, and then press 

+/ repeatedly to tune in the desired station.

Notes on DAB/DAB+ stations

When tuning in a DAB/DAB+ station, it may take a few seconds 

before you hear any sound.

Primary service is automatical y received when secondary service 

ends.

This tuner does not support data services.

Tip

To reduce static noise on a weak FM stereo station, press FM MODE 

repeatedly until “MONO” appears to turn off stereo reception.

Running the DAB Automatic Scan manually
1
 Select“TUNERDAB.”

Press FUNCTION +/ repeatedly.

2 PressTOOLMENUtostarttheDABAutomaticScan.

“Init Scan?” and “Push ENTER” appear.

3 PressENTERtoperformscanning.

Scanning begins. The scanning progress is indicated 

by advancing squares (    ). Depending on the 

DAB/DAB+ services available in your area, scanning 

may take a few minutes.

When scanning is complete, a list of available services 

is created.

Notes

If your country or region does not support DAB/DAB+ broadcast, 

“No Service” appears.

This procedure clears all previously stored presets.

Before unplugging the DAB lead antenna or FM lead antenna, make 

sure the system is turned off to save your own DAB/DAB+ settings.

Presetting radio stations
1
 Tuneinthedesiredstation.
2 PressTUNERMEMORYtoselectthetunermemory

mode.

3 Press+/repeatedlytoselectthedesiredpreset

number.
If another station is already assigned to the selected 

preset number, the station is replaced by the new 

station.

4 PressENTERtostorethestation.
5 Repeatsteps1through4tostoreotherstations.

You can preset up to 20 DAB, 20 FM and 10 AM 

stations.

6 Tocallupapresetradiostation,pressPLAYMODE/

TUNINGMODErepeatedlyuntil“PRESET”appears,

andthenpress+/repeatedlytoselectthedesired

presetnumber.


 To wall outlet

 Loop antenna

 FM lead antenna (Extend it horizontally.)

 Connect brown side.

 75‑ohm coaxial cable with F male type connector (not supplied) 

(CMT‑G1BiP only)

 To DAB external antenna (not supplied) (CMT‑G1BiP only)

 DAB lead antenna (Extend it horizontally.) (CMT‑G1BiP only)

 Connect white side.

 To left speaker

 To right speaker

When carrying this system

Use buttons on the unit.
1 RemoveadisctoprotecttheCDmechanism.
2 SelectCDfunctionusingtheFUNCTIONknob.
3 Pressandholdfor5secondsorlonger.
4 After“LOCK”appears,unplugtheACpowercord.

To use the remote

This manual mainly explains operations using the 

remote, but the same operations can also be performed 

using the buttons on the unit having the same or similar 

names.
Inserting batteries

Slide and remove the battery compartment lid, and insert 

two R03 (size AAA) batteries (supplied),  side first, 

matching the polarities shown below.

Notes on using the remote

With normal use, the batteries should last for about 6 months.

Do not mix an old battery with a new one or mix different types of 

batteries.

If you do not use the remote for a long period of time, remove the 

batteries to avoid damage from battery leakage and corrosion.

Batteries installed into the remote shall not be exposed to excessive 

heat such as sunshine, fire or the like.

To set the clock
1
 Presstoturnonthesystem.
2 PressTIMERMENUtoselecttheclocksetmode.

If “PLAY SET?” flashes, press / repeatedly to select 

“CLOCK SET?,” and then press ENTER.

3 Press/repeatedlytosetthehour,thenpress

ENTER.

4 Usethesameproceduretosettheminutes.
Note

The clock settings are reset when you disconnect the AC power cord 

or if a power failure occurs.

To display the clock when the system is off

Press DISPLAY. The clock is displayed for about 8 

seconds.

Reception of DAB/DAB+ radio station 

(CMT‑G1BiP only)

When you select “TUNER DAB” for the first time after 

you purchase the system, the DAB Automatic Scan starts 

automatical y and creates a list of available services. 

During the DAB Automatic Scan, “    ” appears. Do 

not press any button on the unit or the remote during 

the DAB Automatic Scan. Scanning is interrupted and 

service list may not be created properly. To run the 

DAB Automatic Scan manual y, perform the procedure 

of “Running the DAB Automatic Scan manual y” in 

“Listening to the radio.” If you have moved to another 

area, perform the DAB Automatic Scan manual y and 

re-register the content of broadcasts.


Playing the iPod/iPhone
1
 SelecttheUSBfunction.

Press FUNCTION +/ repeatedly.

2 ConnecttheiPod/iPhonetothe (USB)portusing

theUSBcablesuppliedwithyouriPod/iPhone.

3 Startplayback.

Press .

To control the iPod/iPhone
To

Press

Pause playback

/.

Select a track 

or chapter of 

audiobook/podcast

/. To fast-forward or fast-

rewind, hold down the button.

Find a point in a 

track or chapter of 

audiobook/podcast

Hold down / during 

playback, and release the button at 

the desired point.

Choose the 

selected item

ENTER.

Scroll up/down 

the iPod menus

/.

Return to the 

previous menu or 

select a menu

TOOL MENU or RETURN.

To use the system as a battery charger

You can use the system as a battery charger for an iPod/

iPhone when the system is on.

Connect the iPod/iPhone to the   (USB) port using the 

USB cable supplied with your iPod/iPhone. The charge 

status appears in the iPod/iPhone display. For details, see 

the user’s guide of your iPod/iPhone.
To stop charging an iPod/iPhone

Remove the iPod/iPhone. Turning off the system also 

stops charging the iPod/iPhone.
Notes

If the battery of the iPod/iPhone is empty, the system may not 

recognize it. In such a case, recharge it with a computer, etc. then 

connect it to the system.

The performance of the system may be vary, depending on the 

specifications of your iPod/iPhone.

Do not carry the system with an iPod/iPhone connected to it. Doing 

so may cause a malfunction.

Before disconnecting the iPod/iPhone, pause playback.

Hold down / to fast-forward (fast-rewind) while playing 

video if / does not work.

When the iPhone is connected to the system and you receive a call 

during playback, playback will pause and you can take an incoming 

cal .

To change the volume level, use VOLUME +/. The volume level 

does not change even if you adjust it on the iPod/iPhone.

To use an iPod/iPhone, refer to the user’s guide of your iPod/iPhone.

Sony cannot accept responsibility in the event that data recorded to 

iPod/iPhone is lost or damaged when using an iPod/iPhone with 

this system.

Playing a file of the USB device
The audio format that can be played back on this system 

is MP3/WMA*/AAC*.

* Files with DRM (Digital Rights Management) copyright protection 

or files downloaded from an online music store cannot be played on 

this system. If you try to play one of these files, the system plays the 

next unprotected audio file.

Check the websites below for the information about 

compatible USB devices.

For customers in Europe:

<http://support.sony-europe.com/>
1 SelecttheUSBfunction.

Press FUNCTION +/ repeatedly.

2 ConnecttheUSBdevicetothe (USB)port.
3 Startplayback.

Press .

Other operations
To

Press

Pause playback

. To resume play, press the button 

again.

Stop playback

. To resume play, press *1. To 

cancel resume play, press  again*2.

Select a folder

 +/ repeatedly.

Select a file

/.

Find a point in 

a file

Hold down / during 

playback, and release the button at 

the desired point.

Select Repeat Play REPEAT/FM MODE repeatedly 

until “REP” or “REP1” appears.

*1  When playing a VBR MP3/WMA file, the system may resume 

playback from a different point.

*2  Resume play returns to the top folder.

To change the play mode

Press PLAY MODE/TUNING MODE repeatedly. You 

can select the Normal Play mode (playback in sequence 

of all files on the USB device), Folder Play mode (“ ” 

for all files in the specified folder on the USB device), or 

Shuffle Play mode (“SHUF”).
Notes on the play mode

When you select the Shuffle Play mode “SHUF,” the system shuffle-

plays all audio files in the connected USB device in random order. 

The Shuffle Play mode may play the same file repeatedly.

When the play mode is set to the Folder Play mode, “REP1” is not 

available.

When the play mode is set to the Shuffle Play mode, the repeat 

function is not available.

When the repeat play is set, the Shuffle Play mode is not available. 

When the repeat play is set to “REP1,” the Folder Play mode is not 

available.

When you turn off the system, the selected Shuffle Play mode 

(“SHUF”) is cleared and the play mode returns to the Normal Play 

mode.



0.758176s